JTAG System Update

[nosherfj]

my jtag is on dash 625 and want it to be on 13146 is it just a case of putting dash update on a usb stick? It won't blow my e fuse (mine has bridged the gap) ?

 

[Martin C]

Re: system update on usb stick

my jtag is on dash 625 and want it to be on 13146 is it just a case of putting dash update on a usb stick? It won't blow my e fuse (mine has bridged the gap) ?

no - you need to build the image manually. The update for JTAGs is only for Avatar information.

 

[nosherfj]

Re: system update on usb stick

my avatar for my dash 625 on my jtag is also grey if i get dash 625 on a usb stick is it fine to update so i get a decent avatar?

 

[Martin C]

Yes.

 

[nosherfj]

sorry martin iam a noob on jtags only had mine a month.

i updated my avatar with the dash update 12625 on a usb pen but can i update to 13146. not sure what u mean by manually make image?

 

[frazzeld]

read the sticky

http://www.team-xecuter.com/forums/showthread.php?t=58111


You've got your nand dumps already....use Jtag Tool v3.13 to create the Freeboot image

 

[nosherfj]

thanks guys.

i've managed to make my freeboot image for 13146 dash. put it on a usb stick with flash360.
booted flash 360 hit"A" then it gives me a warning your current nand is not zeropaired if you have a way to switch nands, do so now.
press A button to retest or start button to ignore and continue.

what do you reckon i should do guys.

thanks a million for your help btw.

when making my freeboot i didn't understand if my smc points were original or alternate or the freeboot eject bit?

 

[Martin C]

when making my freeboot i didn't understand if my smc points were original or alternate or the freeboot eject bit?

Then don't update - contact the person who JTAG'd it for you and ask them.

 

[frazzeld]

You bought the console from beasty54...yes?

JTag options

USB
Jasper 16mb
Insert CPU Key
SMC: Original
Dash: 13146
Freeboot Eject: Xellous
DVD: Yes

Create Freeboot

Change Freeboot to updflash.bin

Put on USB drive

Launch Flash360
PRESS A Write updflash.bin to Nand
PRESS B Raw Flash without keeping current kv/config
You will see a WARNING Keyvault encrypted data check mismatch its ok carry on...
PRESS START You will see another WARNING its ok carry on ..
PRESS START
PRESS A It will start flashing when done Press any key to continue....
PRESS BACK Button
PRESS BACK Button to shutdown

IMPORTANT TO DO THIS STRAIGHT AFTER IT SHUTS DOWN>>> POWER CYCLE YOUR XBOX

 

[nosherfj]

cheers

yeah got it from beastyx

think i done it as in nxe iam on dash 13146

however it won't boot into fsd now?

i was unsure how long or quickly to power cycle so just did it for 2 secs?

now to get my fsd back i hope any ideas.

thanks for ya help.

 

[BGAMods]

setup the new dashlaunch 2.22

 

[nosherfj]

thanks all went ok lucky really considering i did'nt power cycle for 1 min but only 2 secs..

just put the dash launch 2.22 installer default.xex on root of usb.

few questions on dash launch 2.22 i didn't understand like blocking live dns so (which i did block).

got my fsd back anyway thanks guys

 

[nosherfj]

it's not really necessary to flash my jtags cfw to LT+1.9 atm is it? might as well wait for LT+2.0?

 

[Martin C]

No, no need to update.

As an FYI, I don't use Flash360 any more - " NAND Flasher 360 for XBOX v1.2.0 by trancy" is much easier to use and allows you to browse for the update

 

[beastyX]

thanks all went ok lucky really considering i did'nt power cycle for 1 min but only 2 secs..

just put the dash launch 2.22 installer default.xex on root of usb.

few questions on dash launch 2.22 i didn't understand like blocking live dns so (which i did block).

got my fsd back anyway thanks guys

Sorry i didn't get back to you last night, i was at work but it seems you got it all sorted anyway.

If you have any more questions just drop me a PM