I have Jtagged a Zephyr xbox. I would like to know which setting applies under Jtag Tool's SMC Point? I installed the Nand-X according to the NON XENON instructions [the ones with the diode that gets soldered to the IR board. As of now, I selected Original.
Jtag Tool question
- Thread starter CapnSavaHoe
- Start date
BL4K3Y
VIP Member
I need to do that mod even if FreeBoot installed properly? Only problem I have is the Dash Launch cannot find the launch.ini file; which I have verified is in the correct folder.
BL4K3Y
VIP Member
OK, I got FSD installed and working flawlessly, now I need a little direction on what is needed to be obtained or done in order to transfer all my backup ISOs into the XBOX.
PS: I also want to remove the 20GB drive and replace it with a SAMSUNG SpinPoint M8 1TB drive [it is 9.5mm high]; do I just plug it in and it will just format it on demand?
BL4K3Y
VIP Member
I use a program called ISO2GOD which will convert ISOs into GOD containers so they can be played from the hard drive.
As for the hard drive, just install it into the HDD caddy and format it via the XBOX dashboard.
As for the hard drive, just install it into the HDD caddy and format it via the XBOX dashboard.
Nice! I already had that tool in the collection.
Is it true I still have to flash the DVD drive eventhough it's a JTAG?
Also, I just ran ISO2GOD on one of my ISOs; where do I place the folder created in the XBOX? Do I have to create a folder called games or something or is it already there? Thanks for all your help man.
Last edited:
Yes you still need to flash your drive.
You have to tell FSD where your games are located, "SETTINGS - GAMEPATH"
So you can put games your whereever you want.
Martin C
VIP Member
Please don't turn this thread into a n00b post. There are things you're asking which could be gotten from searching elsewhere.