JTAG JTAG wont boot

B

bunciscakep

Noob Account
Jul 1, 2011
4
0
Hi...

thanks for your time reading this post.

i have some problem here..

currently i have xbox jasper jtag'ed already...
someday my nephew update the xbox firmware using NFS HP AP25

now when i power on, it only show blank screen on TV and power sign in xbox is turned on but not with the four ring around the power.

i already read the tutorial but still confuse. could you show me the url to resolve this case?

what i really confuse is the media for transfer data between PC and xbox.

sorry for n00b question
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
If your JTAG console has taken an official update, you will need to reflash a freeboot image to the NAND either by USB or LPT. If you only have LPT, flash XeLLous to it using JTAG Tool 3.13 and then update via USB stick from a freeboot image renamed to \updflash.bin.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Buy a NAND-x and install the JTAG programming wires only.

You will also need to check what wiring was used - once you have it open, take pictures of the top and underside of the board.
 
You must log in or register to reply here.