JTAG JTAG wont start green light solid.
- Thread starter kustizi
- Start date
<p>
I searched online and someone said to reflow... Is that a possible way of fixing it?</p>
I searched online and someone said to reflow... Is that a possible way of fixing it?</p>
Last edited:
Antalpromille
VIP Member
So its a xenon, previously "fixed" and with a job that leaves much to ask for. I still say RROD coming.
Martin C
VIP Member
The fact someone deemed it necessary to use nuts and bolts indicates it probably had a history too.
Antalpromille
VIP Member
You could always reflow/reball the GPU, it may help.So there is almost nothing to do?
Had something similar on my old skool jtag, don't know what caused it. I assumed it was an update file on one of the games i had just transferred to hdd. Anyhow, i had misplaced my nand too (sacrilege i know now) this is what i did.
disconnected external hdds/usb, kept starting the machine with eject (finally got into xell reloaded by good luck) grabbed two copies of my nand, compared them, no bad blocks reflashed the nand boom first time.
hope this helps.
disconnected external hdds/usb, kept starting the machine with eject (finally got into xell reloaded by good luck) grabbed two copies of my nand, compared them, no bad blocks
reflashed the nand boom first time. hope this helps.
So, how about i do this. Tomorrow i will reboot it with eject lets say +50 and if doesnt work, i reflow it? Would reball but no skill.
Antalpromille
VIP Member
Martin C
VIP Member
This is what happens when you get an idea from someone randomly posting in your thread. There's no logic at all in his post, so you are best to just ignore it.
Well, I cant figure heads or tails of this thing right now. I just want to get my jtag booting up and working. Martin, could you tell ne what i do then?
Equipment? I just stick it into the oven.Just kidding, heat gun and my friend said that i should put some flux there too, should i or not?
Martin C
VIP Member
I love the way you 'j/k' the oven but carry on with a DIY heat gun.
Look - I ain't gonna lie to you. If you want this to work, send it to someone for a reflow or reball. Yes, it will cost money, but so would a replacement console after you fry it.