[JTAG] Xbox 360 - problems with updating jtag logo freeze

[Dragonslayer_NZ]

I have strange problems trying to update to 14699 and i'm getting real desperate here...

basics: jtag jasper16 with currently 13599 kernel and dashlaunch 2.27 installed, all running fine.

so i wanted to ugrade to metro dash (14699) and built an image using xeBuild GUI v1.1 and also tried freeBOOT ToolBox Maker v2.9.1 and also tried 360 Multi Builder v0.7

when i flashed either of these images by xell or Rawflash v4 and the console is rebooted, the xbox freezes at the logo of xbox 360 (it does not go to the dashboard at all).

Still i was able to fire up xell(ous) so i rebuild the image (again excluding DL2.27) and flashed it again. no change.

reverting back to 13599 via xell works fine.

any ideas?

greetings

 

[hodgie]

im not sure how much it matters, but Multi-Builder is up to v.7 now. maybe try that?

 

[Dragonslayer_NZ]

Thanks for your help, I stuck with 360MultiBuilder0.7.
The problem was with the original NAND dump I was using for the 13599 restore.
I decided to download a RAW image from the XELL URL provided from booting via Eject and used this to create the image.
The difference was the location of the BAD block, 0x18a from original 13599 and 0x18b from downloaded XELL URL. Once I used 360MultiBuilder0.7 to build image, not using Dash Launch, ti works fine!
Just need to restore Avater Items, and install new Dash Launc!
Thanks for your suggestion!

 

[hodgie]

Glad you're up and running!