Jtag zephyr boots to new console settings

[haznpapo]

Hi guys i jatgged my zephyr 360 here are my results.every other boot i get 1 ring of death.and when it boots up i get the controller setup as if my console is brand new.does anyone have a clue how to fix? thank you all in advance.

*** Some console information ***
CB Version: 4558
Serial number: 065913473707
Console region: NTSC/USA (0x00FF)
DVDKey: 4737652FC74049587AA049339B9C7364
Console ID: 092BB8BBD0
MFR-Date: 12-09-07
OSIG String: HL-DT-STDVD-ROM GDR3120L0079
FCRT.bin Required: False

Using xell-reloaded for JTAG/SMC hack
Copying Normal (Old) hack patched SMC... Done!
Including dashlaunch... Done!
Including custom dashlaunch settings (launch.ini)... Done!
Copying nand to data directory, this may take a while... Done!

Parameters sent to xeBuild:

-noenter -t jtag -c zephyr -d data -f 15574 -b DD88AD0C9ED669E7B56794FB68563EFA -p 86E819F8D18D3BC9C2AD4EA791E2856E output.bin

Building nand using xeBuild (this may take a while):

---------------------------------------------------------------
xeBuild v1.03.512
---------------------------------------------------------------
building jtag image
---------------------------------------------------------------
output.bin image built, info:
---------------------------------------------------------------
Console : Zephyr
NAND size: 16MiB
Build : JTAG
Xell : power on console with console eject button
CPU Key : 86E819F8D18D3BC9C2AD4EA791E2856E
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 4737652FC74049587AA049339B9C7364
CF LDV : 7
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------

 

[BL4K3Y]

We provide templates to complete for support.

Please complete the correct template and don't forget to include photos of the install.

 

[Beaver_Buffcoat]

Is the power plug pushed in completely? Is the power brick plugged firmly into a power outlet?

Possibly a power supply issue (intermittent).

 

[haznpapo]

power plug is pushed in and brick is plugged firmly.

 

[Beaver_Buffcoat]

Which jtag wiring method are you using? Diodes, or blackaddr/boxxdr method?

I personally think that the diode method (BAT41) works better and is easier to implement, but your experience may differ.

 

[haznpapo]

Diodes and i've never had issues.maybe due to having a bad block prior to jtag.but dumps did match.

 

[Beaver_Buffcoat]

When you are able to boot the dash, can you run xexmenu/fsdinstaller/etc, or is it still stock? Also, did you unplug the power from the console after writing the NAND?

 

[haznpapo]

yes i can run freestyle dash etc. yes i did unplug the power after writing nand thank you for the help

 

[Beaver_Buffcoat]

You're most welcome. Sorry I couldn't help sort the issue out. The only other thing to suggest is AutoGG, and it might not help, but it's worth a shot if all else fails or nobody else can figure this out. I'll keep looking for an answer, though.

 

[Krafter]

If you were to install the AUD_CLAMP method your problem would most likely go away. The RRoD is the reason you are resetting the dash and the cause of the RRoD is most likely due to the standard diode method. E79 by any chance?

 

[Beaver_Buffcoat]

One more thing- Are you using Kynar wire or Cat5 for the jtag wiring? Cat5 has worked better in my experience. Maybe take another look at the jtag wiring connections to make sure everything is joined nicely. If you have a multimeter, do some continuity checks from point-to-point on the motherboard (one-way polarity w/ diodes).

 

[XDK]

I assume your getting e79 1 red light randomly if so you need to redo your jtag wiring to the aud_clamp method and recreate a new image with aud_clamp ticket in jrunner this will sort the random e79 and the console settings screen issue

 

[Krafter]

^^^^

Common issue with Zephyrs.