LITEON DG-16D2S Jungle flasher help needed

J

jmelbourne

Full Member
Nov 30, 2011
47
0
Hi Guys,

I am just trying to flash a friends drive but cant get it to show in jungle flasher, its a lite on i can open and close the drive with my ck lite but cant get it to show! i have tried a different sata cable a different sata port but still nothing. i have put the console back together and it all works fine, so they drive is not fried, I have flashed a few drives now but never had this problem before.

Can anyone shed some light on this?

Thanks

John
 
manwithoutname

manwithoutname

1
Jun 4, 2010
3,080
0
Which particular type of liteon you're trying to flash?
 
manwithoutname

manwithoutname

1
Jun 4, 2010
3,080
0
Well since you state that you used your setup to flash other drives previously I can't imagine where you'd gone wrong.

Make sure you are running the latest version of Jungleflasher. Also make sure you are using the right port number by connection one of your other drives that you successfully flashed with the same setup and make a note of the i/o port then re-test again with the Liteon drive.
 
You must log in or register to reply here.