LITEON 74850 jungleflasher freezing when drive powers on

[darkeminem]

so long story short i made my own probe to extract my key for my lite on drive, im using xecuter usb pro and my xbox for power( i know its not a good idea but this ones banned anyways) problem is when i turn the drive on and jungle flasher recognizes it it gives me a unhanded error and i cant get past that and i can click continue, then click phatkey and it freezers up, ive ran as admin and disabled drivers on start up , on win 7, ive used jungler flash 1.9.1 and 1.9.2, any ideas? never had this happen before, flashed my other drive with no problems, thanks for any help

 

[reefz3ro]

did you try the obvious things the reset on usbpro a different usb port/cord , reboot pc, a diff pc altogether.

 

[joelj]

Ok this happened to me too.

There are some things you could check.

1. Try a different USB port.
2. Are you by any chance using a Longer USB cable with USB pro rather than the cable it is coming with? If then use the cable it comes with. Longer USB cable results in a freeze when you hit phatkey.
3. If you still have a VIA chipset then try using it. Sometimes in some phats for some odd reason the VIA works but the XUSBPro does not (this is not the case in 99% of the time but it may happen in some odd instance).

Source: My experience... (flashed more than 100 consoles).

 

[darkeminem]

ok , so i had a longer sata cord, changed that to orignal, used all usb slots on my laptop, reset usbpro, reinstalled updated firmware on usbpro, still nothing, also all looks good except when i turn on jungle flasher, the LD6 lite on the usbpro goes red and flashes, its the portio mode lite, graph is here http://team-xecuter.com/forums/showthread.php?t=62937,then it gives me that unhand led exception error crap, im not sure what this means but im stuck, any ideas?

 

[darkeminem]

error is as follows


See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy)
at System.String.Substring(Int32 startIndex, Int32 length)
at 0.2F.p()
at 0.2F.1k()
at 0.2F.O(Object , EventArgs )
at System.Windows.Forms.ComboBox.OnSelectedIndexChanged(EventArgs e)
at System.Windows.Forms.ComboBox.WmReflectCommand(Message& m)
at System.Windows.Forms.ComboBox.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
JungleFlasher
Assembly Version: 1.0.4397.40511
Win32 Version: 0, 1, 92, 0
CodeBase: file:///C:/Users/kcg/Desktop/newxdg3/JungleFlasher%20v0.1.92%20Beta%20(304)/JungleFlasher.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
AxInterop.SHDocVw
Assembly Version: 1.1.0.0
Win32 Version: 0, 1, 92, 0
CodeBase: file:///C:/Users/kcg/Desktop/newxdg3/JungleFlasher%20v0.1.92%20Beta%20(304)/JungleFlasher.exe
----------------------------------------
Interop.SHDocVw
Assembly Version: 1.1.0.0
Win32 Version: 0, 1, 92, 0
CodeBase: file:///C:/Users/kcg/Desktop/newxdg3/JungleFlasher%20v0.1.92%20Beta%20(304)/JungleFlasher.exe
----------------------------------------
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

 

[darkeminem]

no ideas? suggestions?

 

[daftdog198]

Hi.
This will be something to do with your system, maybe conflicting drivers.
If you are planning on flashing a lot of drives then it may be worth getting a windows xp pc.