HITACHI NON-79 jungleflasher keeps freezing

C

crazy-gamer

VIP Member
May 10, 2011
171
0
ok well i wanted to flash my xbox 360 dvd drive (hitachi 3120l)

and when i am doin that i send it to mode B and after that i try to dump the drive and it tells me this

well first it says not responding

then...
 
C

crazy-gamer

VIP Member
May 10, 2011
171
0
Goldensavage said:
Do you have your jungleflasher log you can put up.

Also what hardware are you using? A pic of your setup would be excellent.
Click to expand...
i figured out that problem but when i finish the flash and set my xbox up and i instert a disc it gives me the error

"unrecognized disc"
 
Goldensavage

Goldensavage

VIP Member
Jul 26, 2009
3,332
0
Essex, UK
Could be just a weak old laser, reading cheaper discs then, if the originals are fine.

Or could be burning them wrong, have you checked the layer break on them?

The cheaper the disc, the lighter the dye on the back, the harder the laser has to work. That is why i use Verbs, they have the darkest dye on them, and i never have a problem
 
D

diaboliq20

VIP Member
Jun 23, 2011
3,497
0
Scotland
have u tried re running homefront through ABGX and reburning as a test?
I'm assuming the flash to LT+v1.1 went ok?

edit: taste of my own medicine there being too slow to respond lol.....Sp4rkst4rt3r would be proud lol
 
C

crazy-gamer

VIP Member
May 10, 2011
171
0
diaboliq20 said:
have u tried re running homefront through ABGX and reburning as a test?
I'm assuming the flash to LT+v1.1 went ok?
Click to expand...
i did exactly what the tutorial said on here but im thinkin something happened maybe i didnt place the firmware in the right area? idk im really new to this and it told me that the flash went good and etc but do you think you can give me a walkthrough? on teamviwer?

---------- Post added at 12:21 ---------- Previous post was at 12:20 ----------
Goldensavage said:
Could be just a weak old laser, reading cheaper discs then, if the originals are fine.

Or could be burning them wrong, have you checked the layer break on them?

The cheaper the disc, the lighter the dye on the back, the harder the laser has to work. That is why i use Verbs, they have the darkest dye on them, and i never have a problem
Click to expand...
i have a flashed xbox that works fine and it runs perfect i used to have someone flash them for me but now i wanna do it myself and stop payin him to do it
 
C

crazy-gamer

VIP Member
May 10, 2011
171
0
oh i am so stupid i think i put the wrong firmware in -_- im pretty sure i accidently inserted LT+1.9 and not 1.1 oh man i am soo stupid
 
C

crazy-gamer

VIP Member
May 10, 2011
171
0
diaboliq20 said:
old AND tired man...lol - just can't keep up with u young'ns no more lol
Click to expand...
i am so confused i was gonna flash my lite on and then i pulled it out and thought i had it and i had the 1.1 downloaded and then i placed the 1.9 into jungleflasher because i had the lite on out -_- im so stupiddddd
 
S

sp4rkst4rt3r

VIP Member
Oct 9, 2010
2,126
0
North-West (UK)
crazy-gamer said:
i am so confused i was gonna flash my lite on and then i pulled it out and thought i had it and i had the 1.1 downloaded and then i placed the 1.9 into jungleflasher because i had the lite on out -_- im so stupiddddd
Click to expand...
Flash it with the correct FW then come back and let us know the result buddy.....

diaboliq20 needs to get his Cocoa and head off to bed....lols
 
C

crazy-gamer

VIP Member
May 10, 2011
171
0
dgenx said:
so much easyer if you stick all the cfw in the firmware folder of jungleflasher.then it auto selects the right one for you:rolleyes2:
Click to expand...
i did that i downloaded LT and placed all the firmware into the jungleflasher folder and then i followed the tut and then i placed in a disc and it wouldnt work
 
You must log in or register to reply here.