JUNGLE FLASHER Jungleflasher problem after replacement PCB

[kubas05]

Hi, I have problem with JF. JF loading my PCB like this:

What can I do with this?
I have xbox slim with drive 0401, and PCB LTU2 DG-16D5S

 

[ezzda1]

Do you have a x360usb pro?
You won't get a slim drive to read and write without one.
you can try it by selecting the correct port you have the drive plugged in to. At the moment it looks like you have your hdd selected.

 

[kubas05]

No, but I read my key without it.


Also, I can't open my drive.

 

[ezzda1]

Try selecting the io port you have the drive plugged in to.
However you will have problems writing to a ltu2 pcb without a x360usb pro.

 

[kubas05]

This is the I/O port where I have plugged my drive.

It's not HDD, when I unplugged my drive, It's disappear.

 

[ezzda1]

So why is it showing a seagate hdd in the drive properties?

because you have your hdd io port selected.

 

[kubas05]

Don't know, I will try diferent I/O.

So, I tried differents ports, but all of them can't detect my PCB.

 

[SlothGSR]

Get yourself a usb pro and shouldn't have any issues

 

[BL4K3Y]

Very few SATA chipsets work with slim drives.

If you try it and it doesn't work (you'll probably notice the drive status hangs at 0x51 when using SlimKey), get an X360USB Pro like the others suggested and I guarantee you won't have any more problems like this.

 

[kubas05]

Can I use V2 X360USB PRO?

 

[skillet34]

yes