LITEON 0225 just flashed will not eject but

[jpoy808]

just flashed 0272 firmware with kamikaze hack but will not eject using the button on xbox but will eject using the controller plays games find , I checked the ribbon its ok tested before flashing any suggestions? ck3 pro ejects fine also relocked the drive

---------- Post added at 19:20 ---------- Previous post was at 19:13 ----------

if ribbon was damaged by eject area how to fix without replace , power button works fine just the eject part any suggestions?

 

[jtag360.nl]

Pease next time use the search button.

Here you are to solve the problem.

http://team-xecuter.com/forums/showthread.php?t=70177&highlight=pout

 

[valeto92]

Dude I have the same problem with one of my kamikazes But I thought since it works there's nothing to be worried about

Cheers

 

[conie]

If your ribbon in damaged then you will need a replacement. Does it make a sound when you press eject? If you need a new ribbon I can supply you one.

 

[BrokenRoses22]

I have alot extra xbox 360 parts also.

 

[jpoy808]

when I press the button no sound but ejects fine with controller, so funny just worked fine before flash , plays fine power button works , one question does it matter if the case is on or off

---------- Post added at 20:21 ---------- Previous post was at 20:13 ----------

hey valeto92 does it eject fine with the controller and does it make a sound

 

[conie]

If there is no sound then its the ribbon cable for sure. Try to remove it and put it back into place.

 

[BrokenRoses22]

Nope.

 

[x360ccm]

put new ribbon cable on it and you find it will work,sound like you damaged it taking your xbox apart.

conie will supply you one as he has already said.

 

[jpoy808]

Any one try circuit writer pen to repair the trace?

 

[N.E.Modz]

Any one try circuit writer pen to repair the trace?

use it all the time but only on the trace cut of mxic pcbs, dont think it will work on ribbons etc

dale:wink: