Just wont work.

D

d0x

Noob Account
Apr 20, 2005
2
0
Ok im install a 2.6 CE Lite plus on a 1.2 Xbox and it just wont work.

Im 99% sure I have my d0 lined up correctly on the solderless adapter. I get one blue LED on the chip and all 3 LED's on the switch. My xbox just frags, turns on and off 3 times etc. I also have the copper wire in the very last hole.

I never had a problem installing the 2.3 but this one is giving me trouble and I cant find a good dedicated solderless tutorial for this chip. Any help would be great.
 
C

Cra41g

VIP Member
Sep 30, 2004
335
23
Scotland, UK
d0x said:
Ok im install a 2.6 CE Lite plus on a 1.2 Xbox and it just wont work.

Im 99% sure I have my d0 lined up correctly on the solderless adapter. I get one blue LED on the chip and all 3 LED's on the switch. My xbox just frags, turns on and off 3 times etc. I also have the copper wire in the very last hole.

I never had a problem installing the 2.3 but this one is giving me trouble and I cant find a good dedicated solderless tutorial for this chip. Any help would be great.
Click to expand...

http://www.xbox-modchips.com/tutorials/xecuter-wire.htm

What copper wire do refer to?
 
C

CCR

Full Member
Jun 8, 2005
54
0
Will the xbox boot properly with the mod chip turned off. If it will not boot with chip off then its in your install. If it does boot with chip off recheck "D0". Also make sure all plugs are pluged in good and that the solderless adaptor is in place good and has not moved. then make sure none of the wires coming from the chip has not gotten pinched or borke during assembly
 
Last edited:
F

Fantmx

VIP Member
Feb 15, 2004
2,274
0
CCR said:
Will the xbox boot properly with the mod chip turned off. If it will not boot with chip off then its in your install. If it does boot with chip off recheck "D0". Also make sure all plugs are pluged in good and that the solderless adaptor is in place good and has not moved. then make sure none of the wires coming from the chip has not gotten pinched or borke during assembly
Click to expand...
A D0 will not cause a frag, so it is not that. It may be the switches or the connection to the switches.
 
You must log in or register to reply here.