LITEON DG-16D4S - SLIM Kamakazi on a MXIC

[Robbieboy]

One question.....

Can i do the kamakazi on a MXIC....?

cos i have a spare one to practice......



Edit. see i have 5 winbonds to do........

 

[WalangAlam]

err isn't it better to practice on the winbonds?

 

[RROD!]

nooooooooo ..:crazy: i am sure there is ppl on here more than happy to swap you a winbond for that ?? it would be no good to try that on that how would you know if you did it right???as all you would do is naff up the pcb

 

[Robbieboy]

nooooooooo ..:crazy: i am sure there is ppl on here more than happy to swap you a winbond for that ?? it would be no good to try that on that how would you know if you did it right???as all you would do is naff up the pcb

Yeah i know its mad to do it to a MXIC board.....:smile:

wont JF tell me if it worked.....?

and if i unlock it that way can i not use it....?

 

[Xmods]

sure you can

 

[RROD!]

dont think so best thing to do is keep that safe and have a play with one of the 5 you are going to do then if you balls it up then you got a mxic to save ur ass??if you find the giude on here for winbond you cant go wrong ive done it with a craft knife nice and slow worked real good just make sure to mark up the chip first and you will be fine least this way mxic is easyer to do but if you play with that and feck it up then what will you do with the 5 you meant to do?

 

[Robbieboy]

sure you can

Music to my ears....:smile:

Can i put it in any liteon slim drive when done....? (0272, 0225 ect)

Sorry for all the noob questions...:redface:

---------- Post added at 20:40 ---------- Previous post was at 20:39 ----------

dont think so best thing to do is keep that safe and have a play with one of the 5 you are going to do then if you balls it up then you got a mxic to save ur ass??if you find the giude on here for winbond you cant go wrong ive done it with a craft knife nice and slow worked real good just make sure to mark up the chip first and you will be fine least this way mxic is easyer to do but if you play with that and feck it up then what will you do with the 5 you meant to do?

Yeah that-s true...

Thanks for all the help guys.

 

[RROD!]

no probs all the best and let us know how you get on

 

[sick360mods]

i would keep that one safe and work on the others first

 

[noipi]

sure go ahead..it is much more easier to hole or dig good luck. i also prefer to unlock the winbond than the mxic.

 

[Robbieboy]

Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0x0
Device ID: 0x0
Flash Name: Unknown type
Flash Size: n/a
Unknown flash type Write aborted !

? not shure what happend...?

but it is unlocked 0x00 and in vendor mode

 

[sp4rkst4rt3r]

Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0x0
Device ID: 0x0
Flash Name: Unknown type
Flash Size: n/a
Unknown flash type Write aborted !

? not shure what happend...?

but it is unlocked 0x00 and in vendor mode

All you have to do now is write to it, put it back into your console and hope you didn't dig tooooo deep :redface:

 

[T3ROR]

kamakazi works on any lite-on slim board, i do all my boards with kamakazi method easier and faster and when you need to unlock in future just use alcohol and swab doesn't get easier.

 

[Dosk3n]

You have either went to far or in the wrong place and damaged the chip resulting in losing all chip properties. Its unlocked but also cant be written to or used now as its screwed.

 

[Robbieboy]

Oh well i learnt how not to do it now...:facepalm:

Looking at it i think i went toooo deep.....

thanks.

 

[cowboy619]

Yip looks like its bust

 

[sp4rkst4rt3r]

Oh well i learnt how not to do it now...:facepalm:

Looking at it i think i went toooo deep.....

thanks.

That is a serious waste of an MXIC PCB :eek2:

Peeps on here would have given you a WB PCB plus cash for that MXIC PCB :frown:

Why try it on a chip that doesn't require it :crazy:

You can obviously do what you want with your PCB....just asking :rolleyes2:

 

[x360ccm]

why people do the kamakazi on a mxic board.i'll never understand that,for ffs theres better ways to unlock them.which are guarantee to work and much safer.:facepalm:

 

[MANUMAN]

kamakazi works on any lite-on slim board, i do all my boards with kamakazi method easier and faster and when you need to unlock in future just use alcohol and swab doesn't get easier.

:facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm:

 

[Martin C]

What a waste! You have Winbond boards so why not practice on those? I hope you don't have 'customers' drives to do as maybe they're better off knowing you've not got the foggiest idea.