Keep getting IoTimedOut error while trying to flash my xbuild image

C

CLMT420

Senior Member
Jan 5, 2012
109
0
Sacramento, CA
I read my nand fine, booted xell, got my key, created an image with xebuild and im getting this random error. Any suggestions? I can post my soldering if necessary but I just read and wrote the nand so I figure that it should be halfway decent to get this far.

PS:I took the key info out but j-runner confirms it correct.


Code: 
===================================================
Monday, February 25, 2013 11:18:25 PM

J-Runner v0.2 Beta (287) Started



Filechecks disabled - No Filechecks carried out
Initializing nanddump1.bin..
Nand Initialization Finished
Load Files Initiliazation Finished
13599
Started Creation of the 13599 xebuild image
KV Info saved to file
---------------------------------------------------------------
     xeBuild v1.06.555
---------------------------------------------------------------
building glitch image
---------------------------------------------------------------
C:\Users\JR\Desktop\New folder\J-Runner v02 Beta (287) Core Pack\J-Runner v02 Beta (287) Core Pack\032976174907\updflash.bin image built, info:
---------------------------------------------------------------
Console   : Falcon
NAND size : 16MiB
Build     : Glitch
Xell      : power on console with console eject button
Serial    : 032976174907
ConsoleId : 032548883922
MoboSerial: 8395042203997497
Mfg Date  : 12/05/2007
CPU Key   : 1
1BL Key   : D
DVD Key   : 6
CF LDV    : 7
KV type   : type2 (hashed)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\JR\Desktop\New folder\J-Runner v02 Beta (287) Core Pack\J-Runner v02 Beta (287) Core Pack\032976174907
Image is Ready
Version: 03
Flash Config: 0x01198010
Writing Nand
updflash.bin
Win32Error
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
IoTimedOut
 
C

CLMT420

Senior Member
Jan 5, 2012
109
0
Sacramento, CA
So I sorted it out, I rebooted my computer and made sure not programs were open to interfere J-runner and the flashing went fine. I had a feeling when I saw it was an I/O error I guess. Here my log:

Code: 
Tuesday, February 26, 2013 12:06:07 AM

J-Runner v0.2 Beta (287) Started



Filechecks disabled - No Filechecks carried out
Initializing nanddump1.bin..
Nand Initialization Finished
Load Files Initiliazation Finished
13599
Started Creation of the 13599 xebuild image
KV Info saved to file
---------------------------------------------------------------
     xeBuild v1.06.555
---------------------------------------------------------------
building glitch image
---------------------------------------------------------------
C:\Users\JR\Desktop\New folder\J-Runner v02 Beta (287) Core Pack\J-Runner v02 Beta (287) Core Pack\032976174907\updflash.bin image built, info:
---------------------------------------------------------------
Console   : Falcon
NAND size : 16MiB
Build     : Glitch
Xell      : power on console with console eject button
Serial    : 032976174907
ConsoleId : 032548883922
MoboSerial: 8395042203997497
Mfg Date  : 12/05/2007
CPU Key   : 1
1BL Key   : DD
DVD Key   : 6
CF LDV    : 7
KV type   : type2 (hashed)
---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\JR\Desktop\New folder\J-Runner v02 Beta (287) Core Pack\J-Runner v02 Beta (287) Core Pack\032976174907
Image is Ready
Version: 03
Flash Config: 0x01198010
Writing Nand
updflash.bin
Done!
in 1:54 min:sec
 
C

CLMT420

Senior Member
Jan 5, 2012
109
0
Sacramento, CA
Noted, I was following ubergerks alternate solder tutorial and a few we're covered with hot glue so I assumed it was ok. I really prefer the wires only install as opposed to the qsb method.
 
M

mat1110

Senior Member
Jun 21, 2012
135
0
UK
when all is finished with decent glitch times then use hot glue. If you have to change to alternate solder points then you will not have much chance of taking the wire of without pulling the point.
 
C

CLMT420

Senior Member
Jan 5, 2012
109
0
Sacramento, CA
That's what I did my post_out1 was solid but hanging on by a thread. To be clear it wasn't on every point only ones that were not 100% sturdy I guess, this was what I was referencing btw:



 
Last edited:
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
CLMT420 said:
That's what I did my post_out1 was solid but hanging on by a thread
Click to expand...
That's a contradiction in terms and TBH just confirms what I wrote. ALL your solder points should be solid. If you have to rely on hot glue to keep them in place then once that breaks down, you have to remove all that hot glue to get to it.

I reballed a console a few months ago and it took me an hour to remove all the hot glue before I could put it on my BGA workstation. Not fun.

Buy Kapton tape and use that to hold wires in place.
 
You must log in or register to reply here.