Kernal 13 & 14 Error

life4less

Noob Account
Feb 12, 2006
3
0
After installing mod chip 2.6 soderless, DO point is connected good, auto installer formatted 200 Gig correctly after finished formating to continue with auto install for my dash boards it froze for long time. restarted xbox and keep getting most of the time 14 error which according to auto is Error loading Dashboard. I reattempted and reflashed BIOS, erased hard drive to see if can go through reformat again. Still no luck, get xbox logo with xecuter then goes to 14 error. Even with chip not enabled says call Microsoft for servicing.

What are some other options I can try to get rid of this Error? I still have the orginal 8 gig drive with all MS on there should I copy the 8 gig to 200 gig to recieve orginal MS dash back?

Thank you for assistance.
 

islander223

VIP Member
Sep 13, 2005
304
0
Somewhere in Indian Ocean
It could be an installer problem, try using a different auto-installer. How about your new HDD, was it set to cable select? You can also try using your stock HDD to check if the problem is your large HDD.
 

MKChampion

VIP Member
Oct 12, 2004
875
0
Toronto, Canada
well since you've formatted the drive there's no dash to load so error 13/14 are to be expected
you should have backed up the C and E drive from your stock hdd to your pc
then make a bootdisc of the whichever dash you'd like to use
remember to edit the dash settings to enable ftp
boot up the dash in your box and ftp the contents of your backed up C and E drive to your new hdd along with transferring the hacked dash files as well

i've never used an auto-installer so i don't know why it froze