LITEON 0225 Key Extraction Failed

loggan26 · Jun 4, 2011

I cant figure out why i cant extract the key for this 0225, it is labeled 9504 but in newest JF it shows as 0225, i have both x360 usbpro and via card i have used both as per the the jf tutorial and vid guides here and it always produces same error SlimKey Extraction Failed!

Below is Jf log, any hints appreciated

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.83 Beta (241)
Session Started Sat Jun 04 22:35:18 2011

This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 2 Com Ports.
Found 10 windows drives A: C: D: E: F: G: H: I: J: L:
Found 3 CD/DVD drives D: I: J:

Drive is Slim Lite-On..

0000: 05 80 20 30 5B 00 00 00 - 50 4C 64 51 20 20 20 20 .. 0[...PLdQ
0010: 64 45 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 dE-16D4S
0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0070: 00 00 00 00 ....

Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
............
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
............
Stage 1 failed

Key: D35E78A7944AE162FCD3063E13685C678 verification failed !

SlimKey extraction failed!

mackdaddy · Jun 4, 2011

did you update your xbox to the new dashboard if so the key is in a different location there for jf can not find it

frayed · Jun 4, 2011

mackdaddy said:
did you update your xbox to the new dashboard if so the key is in a different location there for jf can not find it

not true, v1.83b241 will read it

mackdaddy · Jun 4, 2011

my bad i thought it couldn`t

jsinger47 · Jun 5, 2011

the problem is that you are sending device intro

if you had read the jungleflasher tutorial, you would have seen that you are supposed to press "no" at the first prompt after pressing slimkey

EDIT: i am stupid, you would be getting slimkey failed if you pressed unlock
however, i find it interesting that you have to resend vendor intro
you may want to power cycle drive, then try slimkey

loggan26 · Jun 5, 2011

This is a virgin console its brand new out the box, never been hooked up to net or nothing, as i said i have followed the guide which states "click slimkey, choose NO," and it produces the above error, any other advice????????

0000: 05 80 20 30 5B 00 00 00 - 50 4C 64 51 20 20 20 20 .. 0[...PLdQ
0010: 64 45 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 dE-16D4S
0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0070: 00 00 00 00 ....

Sending Vendor Intro to port 0x0000

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
............
Stage 1 failed

Key: D35E78A7944AE162FCD3063E1367C678 verification failed !

SlimKey extraction failed!

Logan

hamodwii · Jun 7, 2011

i have the same issu
brand new slim
clicked the slim key
chossed no
give me the resend massage

anyone?

Add45 · Jun 8, 2011

Did you try 'slim unlock' then 'read' ? method?

iSkirmish · Jun 8, 2011

Serial flash found with Status 0x72 <-- is usually good? Or means it was successful? I believe. o-o

hamodwii · Jun 8, 2011

i tried again it still gives me (MTK VENDOR intri failled)

what to do i am not using x360usb pro

sp4rkst4rt3r · Jun 8, 2011

hamodwii said:
i tried again it still gives me (MTK VENDOR intri failled)

what to do i am not using x360usb pro

Your problem may be due to SATA to PC Chipset incompatability.

It is documented within Jungleflasher that there can be compatability issues with SATA Cards.

If I remember correctly this is the reason why peeps with 0225 drives were advised to purchase the X360USB Pro......

Goldensavage · Jun 8, 2011

hamodwii said:
i tried again it still gives me (MTK VENDOR intri failled)

what to do i am not using x360usb pro

It is probably your chipset. The slims need an extremely compatible chipset, which i have not found yet or the X360USB Pro.

If you are not using the X360USB Pro, then your sata is probably incompatible.

hamodwii · Jun 8, 2011

i wiil purchase the x360usb pro i hope that will solve it.

reanimax · Jun 10, 2011

Hello,
i have a new xbox slim 250gb, the label on the drive says firmware 9504, but jungleflasher says 0225 (i updated to the 2.0.13146.0 the first thing after i unboxed it

)

here is my log

Code:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.83 Beta (241)

Session Started Fri Jun 10 22:17:38 2011



This is a 32 bit process running on 2 x 32 bit CPUs 

portio32.sys Driver Installed 

portio32.sys Driver Started, thanks Schtrom ! 

Found 6 I/O Ports.

Found 2 Com Ports.

Found 3 windows drives A: C: E:

Found 0 CD/DVD drives



Drive is Slim Lite-On.. 

Drive is Slim Lite-On.. 





0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS    

0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S        

0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............

0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0060: 44 37 31 31 43 47 30 32 - 31 38 30 31 30 30 35 31 D711CG0218010051

0070: 41 20 20 20                                       A               



Sending Password to Drive on port 0xEFE0



Getting Status from port 0xEFE0

Invalid Status 0x51

Sending Vendor Intro to port 0xEFE0

Status 0x51

Drive is Slim Lite-On.. 





0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS    

0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S        

0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............

0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0060: 44 37 31 31 43 47 30 32 - 31 38 30 31 30 30 35 31 D711CG0218010051

0070: 41 20 20 20                                       A               



Sending Password to Drive on port 0xEFE0



SlimKey extraction failed!



Drive is Slim Lite-On.. 

Drive is Slim Lite-On.. 

Drive is Slim Lite-On.. 





0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS    

0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S        

0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............

0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0060: 44 37 31 31 43 47 30 32 - 31 38 30 31 30 30 35 31 D711CG0218010051

0070: 41 20 20 20                                       A               



Sending Password to Drive on port 0xEFE0

i tried on 2 computer
1)vista 32 bit

Code:

Chipset
-------------------------------------------------------------------------

Northbridge            SiS 671/FX/DX/MX rev. 00
Southbridge            SiS 968 rev. 01
Graphic Interface        PCI-Express

2)windows 7 32bit with a p4p800 motherboard
cpuz:

Code:

Chipset
-------------------------------------------------------------------------

Northbridge            Intel i865P/PE/G/i848P rev. A2
Southbridge            Intel 82801EB (ICH5) rev. 02

is it my sata that's the problem?

loggan26 · Jun 15, 2011

Okay 4 days at this now and still im getting the same error SlimKey failed I am using the X360usb pro updated the newest JF and still im getting the same errors. Can anyone explain to me why this is failing??????????

Run JF it spots slim drive click "Slim Key" button up pops prompt as above choose "NO"

Power Cycle the drive as per the prompt above.....

Drive intros and then fails as in the screen above.

As above the drive goes into vendor mode but looks like the key can not be verified....

Any help would be greatly appreciated thank you...

Logan

tarnix · Oct 17, 2011

Hello, have you found a fix for this yet? im having the same error, i had it flashed with the old LT+ but my dash has been updated on the xbox and now i cant re-flash my drive with 2.0 :<

Search

Search

LITEON 0225 Key Extraction Failed

loggan26

Junior Member

mackdaddy

frayed

DINDU NUFFIN

mackdaddy

jsinger47

loggan26

Junior Member

hamodwii

Senior Member

Add45

Full Member

iSkirmish

Noob Account

hamodwii

Senior Member

sp4rkst4rt3r

Goldensavage

hamodwii

Senior Member

reanimax

Noob Account

loggan26

Junior Member

tarnix

Noob Account