LITEON 0225 key inject

[x360ccm]

i was told i could hex edit drive key in to 0xA030. but i dont no how to do that .

i wouldnt no were to start doing it that way.any help would be good lol:biggrin:

 

[fersy]

never tried it why dont you just put the key in manually in jf

 

[BL4K3Y]

Yes, use the Manual Spoofing button in JungleFlasher dgenx. Paste your drive key into the box, click Check and ensure that the OSIG at the bottom matches the target drive .

 

[x360ccm]

Yes, use the Manual Spoof option in JungleFlasher dgenx .

i try that,it wont work when i write the fw to the drive.

when i read the fw back of drive the key not on it.

this is a rebuilt dummy useing the serial rebuilder.

i even try the right click in the target area and selected the write key but that fails at stage 1,

 

[x360ccm]

still no joy with this.but if i leave the key as all ff i get this.
i right click the target area and click the write key i get this


Loading firmware file C:\Documents and Settings\Dgenx\Desktop\JungleFlasher v0.1.88 Beta (280)\firmware\LTPlus-0225-v1.92.bin
MD5 hash: c3f45b669000bb2d178394fa4164896d
Genuine LT plus v1.92
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LT-Plus 1.92
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
...............
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 6000mS
Write verified OK !
Restoring sector 0x3E000.
Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorisation Failed!
Restore Verify Failed !

Stage 1, Complete!
Stage 2, Complete!
Done!

but if i manual spoof my key and right click the target area and click the write key i get this.

DVD Key copied to target
Target is LT - ID strings not copied to Target
Stage 1, Complete!

i read dos flash v2 can inject the key.but i dont have sata2

is this true.

this is all to do with this thread.

http://www.team-xecuter.com/forums/showthread.php?t=71413

i hit a brick wall.well it seems lol.

but i managed to get it into a 0272 drive

so i find it strange.