Lawl look at my bad soldering i can use tips

[Russian06]

So yeah its like the second time ive soldered. Ive decided to wait for my friend whos good to help me install the qsb's. Heres a video i made to show my suckish install fail [ame]http://www.youtube.com/watch?v=Qkk0HYJXxxk[/ame] rate comment lolol. Let me know what parts are soldered wrong. enjoy and laugh

heres pictures of my soldering please see

http://gyazo.com/e5fea93a426c9b0496a01106ab957f3d.png

http://gyazo.com/177c47aafd41144077a138693d21d102.png

 

[Fisticuffs]

It looks like you bridged alot of points on the QSBs, Im pretty sure its not gonna work, Send it to someone to fix it before you kill it, I heard XMODS does good work here in the US

http://www.team-xecuter.com/forums/showthread.php?t=54104

 

[Russian06]

will the bridge break something? im not going to mess with it until my friend whos good will fix it and resolder it. And worse casinario i can just use a different method such as pin headers or wire correct?

 

[playingmax]

i too am in the us.

 

[J2G]

Don't take it up for a living you will be living on the street in no time

 

[Russian06]

Don't take it up for a living you will me living on the street in no time

lawl i know man but its only my second time. ive had no instruction so its like trial and error thats why im not messign with it anymore. Dont worry i will nothing near that crap, considering computer programing or a carrer in the military.

 

[Russian06]

http://gyazo.com/e5fea93a426c9b0496a01106ab957f3d.png

http://gyazo.com/177c47aafd41144077a138693d21d102.png

my solder pics

 

[Martin C]

lawl i know man but its only my second time. ive had no instruction so its like trial and error thats why im not messign with it anymore. Dont worry i will nothing near that crap, considering computer programing or a carrer in the military.

You know you can just google "soldering guide" and there are plenty of sites out there to help you achieve what you want

 

[ishockin]

Oh em gee what were you using a 150 watt iron looks like you burned off the pads to qsbs why not try to practice by soldering wires to extra controllers or something?

http://lmgtfy.com/?q=Soldering+guide

 

[Russian06]

what do u think is the easiest to do from here as far as the nand situation. Im not going to solder anymore and leave it to my friend. But should i have him finish the qsb's or are they dead? or should i have em do the pin headers or wire. Also how do i do the pin headers? that seems like an easy method

 

[Martin C]

All soldering is easy, IF you can solder. My advice is to leave everything as is and hope you've not damaged anything in the process.

 

[Russian06]

thanks martin il leave it how it is. youve been good help and if the qsb fails than il have my friend do the pin headers since no soldering is involved? the xbox motherboard itselft should be fine?

 

[TilVl]

No you got to solder with pin header. Remove all solder from holds place in pinheader and tape it down. Flip board over and add a dab of solder to each pin.

Pin header by far the easiest way. Just don't tape them down to hard you'll push the pins.

 

[Fisticuffs]

Also It'll Be alot easier if you take the motherboard out of the case, As you can get at the board from different angles

 

[syst3merror]

wow! now THAT is a soldering job! lol Were you using a soldering iron or a soldering gun? you want to use a soldering iron with the smallest tip you can get and only around 15-25 watts!

 

[Russian06]

lol yeahh yeah i know i suck, im using a 25 W iron. thanks for the pin headers tip, il get another picture out when im done correctly so yall can suck it. haha

 

[bandit123]

Murderer