switched to mkm003 to have printable and the btter qualirty verbs for xgd3 burning with imgburn.
the change Kinda messed up my ihas424 or its dying or Ihave a bad batch of verbs that has a charcoly chemical smell to the discs?
I've read the great xgd3 guide but I can't post there.
usb to sata and 5v molex power supply let me know if this is bad used to produce the gold burns instead of mounting in my tower used on a laptop just put in 4 gb of ram dual core nothing happens while I'm burning not connected to any network
ihas424 burnermax was doing lightning mkm003 settings
opc off
oht off
sb on
os on
fht on
let me know what you guys think is best for mkm003
overspeed on or off?
img burn settings
mkm003 at 4x
opc off
burn proof off
reading always use buffered i/o checked
512mbbuffer enable buffer recovery
buffer recovery thresholds
main 100%
device 100%
average disc que length 5
eject after write
I tried clearing opc and just starting from mkm003 burns they were sh*t but getting better and I burned one in all kprobe stats and the burns look real good showin me lots of zeroes untill I hit the layer break and the spike ruins the entire burn as the better quality of the second half of the disc tries to bring down the average but can't do anything about the layer break spike.
While back on mkm001 think I read that opc can take away or produce a layer break spike so I tried it and it doubled the last stable not crazy off the charts burn so I turned it off and seen os might be turned off for mkm003
made the pi rise slightly and the pif lower slghitly very slightly so I'm lost bout to burn another coaster if I don't figure out whats wrong.
4 pics
1 this mornign with rego settings above
2 the same went crazy off the charts
3 opc on pretty much doubled the layer break and numbers
4 opc off os off slight up and down didn't really change anything.
Like I said I cleared opc history and so re68 is really the 10th burn since clearing opc
so please help me out before I ruin another I really think its the drive or the discs but most everything but the layer break burns so nicely showing me the zeroes I want.
please and thank you
well guess its a bitch to post pictures so you don't get any but please help me
the change Kinda messed up my ihas424 or its dying or Ihave a bad batch of verbs that has a charcoly chemical smell to the discs?
I've read the great xgd3 guide but I can't post there.
usb to sata and 5v molex power supply let me know if this is bad used to produce the gold burns instead of mounting in my tower used on a laptop just put in 4 gb of ram dual core nothing happens while I'm burning not connected to any network
ihas424 burnermax was doing lightning mkm003 settings
opc off
oht off
sb on
os on
fht on
let me know what you guys think is best for mkm003
overspeed on or off?
img burn settings
mkm003 at 4x
opc off
burn proof off
reading always use buffered i/o checked
512mbbuffer enable buffer recovery
buffer recovery thresholds
main 100%
device 100%
average disc que length 5
eject after write
I tried clearing opc and just starting from mkm003 burns they were sh*t but getting better and I burned one in all kprobe stats and the burns look real good showin me lots of zeroes untill I hit the layer break and the spike ruins the entire burn as the better quality of the second half of the disc tries to bring down the average but can't do anything about the layer break spike.
While back on mkm001 think I read that opc can take away or produce a layer break spike so I tried it and it doubled the last stable not crazy off the charts burn so I turned it off and seen os might be turned off for mkm003
made the pi rise slightly and the pif lower slghitly very slightly so I'm lost bout to burn another coaster if I don't figure out whats wrong.
4 pics
1 this mornign with rego settings above
2 the same went crazy off the charts
3 opc on pretty much doubled the layer break and numbers
4 opc off os off slight up and down didn't really change anything.
Like I said I cleared opc history and so re68 is really the 10th burn since clearing opc
so please help me out before I ruin another I really think its the drive or the discs but most everything but the layer break burns so nicely showing me the zeroes I want.
please and thank you
well guess its a bitch to post pictures so you don't get any but please help me
