less annoying title

[nolimit5005]

help me with my dame xbox360

i have phat xbox360 (512mb nand) dash 12625 after i done everything in the tutorial to rgh it from reading the nand and got matching dump then build xell image using multibuilder 0.7 and flash it using nandpro 3 and i got the cpu key then build nandflash.bin using multibuilder 0.7 then put it in the usb stick and flashed the xbox using this usb stick in xell (the new hacked image is 14699) while flashing in xell i got a ton of error the the xbox has shut down automatically after that i restarted the xbox i got black screen and only the solid green led in the middle i tried to write the nandflash.bin directly using hardware method i got the same problem nothing at all also no xell
i tried to flash back the original nand image also the same thing i tried to check the ldv i found it matching the num of f's in the efuse i tried every thing and nothing and the solder is ok because i run the xell in the first time any one have any idea plzzzzzzzz????

 

[Martin C]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

Flash using NANDPro or get rawflash v4.

Next time, post a topic with a meaningful title.

 

[nolimit5005]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

man i told you i tried that also i now xell to use rawflash4

---------- Post added at 05:59 ---------- Previous post was at 05:56 ----------

man i told you i tried that also i now xell to use rawflash4

sorry xell is not running to use rawflash4

 

[Martin C]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

so can you boot to xell still with eject?

 

[nolimit5005]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

no

 

[Martin C]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

flash your original NAND back. If it works, we'll go from there.

 

[nolimit5005]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

also the original give me black screen and solid green led in the middle and yes it's clean because i have more the 4 matching dump

 

[Martin C]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

Have you updated the console since the last NAND dump? LDV might be an issue here.

 

[RnRdude]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

when you flash your original nand back you do have to dissable the CL chip.. just put the chip in program mode.. or desolder the power wire..

 

[Martin C]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

when you flash your original nand back you do have to dissable the CL chip.. just put the chip in program mode.. or desolder the power wire..

You shouldn't have to. Provided your console boots within 20 secs it should fire up. That and you're not on a new CB_B trinity with dual boot.

 

[nolimit5005]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

Have you updated the console since the last NAND dump? LDV might be an issue here.

no i didn't update also i tried with cr on and off also nothing

also when flashed the xell first time the geen led in the CR was blinking now only the red led is on

is the xbox is now F*cked up?

 

[AteOeight]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

Some pictures of your work would help out greatly. Also, might be silly question, but was your cr programming successful?

 

[nolimit5005]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

Some pictures of your work would help out greatly. Also, might be silly question, but was your cr programming successful?

i will try to add pic

yes the cr programming successful because in the first time i got xell running and i got the cpu key and also i decrypted the original nand with this key

 

[rdubbs007]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

It sounds like some shoddy soldering TBH......

 

[Martin C]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

Read my LDV sticky in case there's a change to the LDV on your console.

 

[nolimit5005]

Re: help plzzzzzzzzzzzzzzzzzzzzzzzzzzz

fuseset 00: c0ffffffffffffff
fuseset 01: 0f0f0f0f0f0f0ff0
fuseset 02: 000000f000000000
fuseset 03: 726********76e98
fuseset 04: 726********76e98
fuseset 05: 075********85fa8
fuseset 06: 075********85fa8
fuseset 07: fffff00000000000
fuseset 08: 0000000000000000
fuseset 09: 0000000000000000
fuseset 10: 0000000000000000
fuseset 11: 0000000000000000

 

[TilVl]

You should've blocked your console serial and not the dvdkey. Dvdkey are worthless.

 

[Wretched]

I had a black screen after a bad flash. I had to re-flash the ecc file to the xbox and the hacked nand image with nandpro. I could not boot to xell at all. But it is working now 100%

 

[nolimit5005]

now i tried to flash to the original nand after 10 sec of starting the console it give me 3 red ring

 

[Utmad]

and what is the secondary error code