ANSWERED Libusb not showing up under Device manager

Status
Not open for further replies.

hersheys247

VIP Member
Dec 25, 2011
1,128
88
Detroit area, MI, USA
Can anyone help me because me and carlos007 tried to get it to show up but it's still not showing help please. using USB PRO 2
~thanks
Make sure ur update switch is set to off, pointed away from the reset button. Can u confirm

Sent from my brain tumor causing device using Tapatalk
 

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
Nice ascii illustration :)

Now back to the original question is the Update Switch on or off ?

http://www.team-xecuter.com/forums/showthread.php?t=86682

---------- Post added at 00:27 ---------- Previous post was at 00:25 ----------

Umm do i plug in Molex power and usb or just usb and the switch is like this
[. [ ] ] on the side that says 'Update'


Sent from my iPod touch using Core
yes of course you plug in the molex - it needs 12V to operate correctly.
 

wendeng

Full Member
Apr 6, 2011
53
0
Where do you live
I was using the ck3 probe cord instead of the DVD one that came with it does that affect anything


Sent from my iPod touch using Core
 
Last edited:

carlos007

VIP Member
May 19, 2009
326
0
I tried to get wendeng v2 working through team viewer but couldn't.

Run down of what we did.Tried on 2 computers laptop desktop running windows 7 32 bit.

Update switch off,aux on.
In device manager I get the xecuter ck3i showing the com 5 but libusb doesn't show up.
No yellow explanation are showing up either only when first time plugged the v2 and right clicked to update driver manually.

Any ideas

added
Can and what does the rest button do?
 
Last edited:

wendeng

Full Member
Apr 6, 2011
53
0
Where do you live
Tried to update but a get failed please advise

XECUTER X360USB PRO Firmware Update Tool
Version: 0.12

HID buffer read timeout.
BootLoader Version:0.0.0

XECUTER X360USB HID bootloader attached.
Loading: C:\Users\wen\Desktop\songs\Desktop\X360USB_PRO_FIRMWARE_0.18.1\X360USB_PRO_0.18.1.hex

Erasing Flash...
HID buffer read timeout.
HID buffer read timeout.
Writing Flash:HID buffer read timeout.

Write Failed
Verify Flash: HID buffer read timeout.

Read Failed
Verified Failed...
Resetting Device...
 

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
"BootLoader Version:0.0.0"

That's wrong for starters

it should be

XECUTER X360USB HID bootloader attached.
BootLoader Version:1.0.3
My advice is to send it back to whoever you bought it from and get them to test it - that way you can be sure if its either you or the product.

Either way you will get back one that is tested working
 
Status
Not open for further replies.