Hi i was wondering/hopeing that team xecuter or someone could make some software that works
in linux? so that i would have no reason to use "crap" windows.
it would be greatly appreciated;D
this is the dmesg for Xecuter X360USB PRO V1
[ 5283.347167] usb 4-2: New USB device found, idVendor=11d4, idProduct=8335
[ 5283.347178] usb 4-2: New USB device strings: Mfr=10, Product=11, SerialNumber=12
[ 5283.347187] usb 4-2: Product: X360USB PRO
[ 5283.347195] usb 4-2: Manufacturer: XECUTER
[ 5283.347203] usb 4-2: SerialNumber: NCC74656
[ 5283.349287] hub 4-2:1.0: USB hub found
[ 5283.351144] hub 4-2:1.0: 2 ports detected
[ 5283.637249] usb 4-2.1: new full-speed USB device number 4 using ohci_hcd
[ 5283.755208] usb 4-2.1: New USB device found, idVendor=11d4, idProduct=8333
[ 5283.755222] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5283.755231] usb 4-2.1: Product: X360USB PIO
[ 5283.755239] usb 4-2.1: Manufacturer: XECUTER
[ 5283.755247] usb 4-2.1: SerialNumber: NCC-1701-D
[ 5285.033250] usb 4-2.2: new full-speed USB device number 5 using ohci_hcd
[ 5285.135172] usb 4-2.2: not running at top speed; connect to a high speed hub
[ 5285.162258] usb 4-2.2: New USB device found, idVendor=11d4, idProduct=8336
[ 5285.162272] usb 4-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5285.162281] usb 4-2.2: Product: X360USB API
[ 5285.162290] usb 4-2.2: Manufacturer: XECUTER
[ 5285.162297] usb 4-2.2: SerialNumber: 000000000002
[ 5285.211494] Initializing USB Mass Storage driver...
[ 5285.219163] scsi6 : usb-storage 4-2.2:1.0
[ 5285.219404] usbcore: registered new interface driver usb-storage
[ 5285.219408] USB Mass Storage support registered.
[ 5286.225256] scsi 6:0:0:0: Direct-Access SPIF301 USB2SATA Bridge 0124 PQ: 0 ANSI: 2
[ 5286.228118] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 5286.249301] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Best regards
in linux? so that i would have no reason to use "crap" windows.
it would be greatly appreciated;D
this is the dmesg for Xecuter X360USB PRO V1
[ 5283.347167] usb 4-2: New USB device found, idVendor=11d4, idProduct=8335
[ 5283.347178] usb 4-2: New USB device strings: Mfr=10, Product=11, SerialNumber=12
[ 5283.347187] usb 4-2: Product: X360USB PRO
[ 5283.347195] usb 4-2: Manufacturer: XECUTER
[ 5283.347203] usb 4-2: SerialNumber: NCC74656
[ 5283.349287] hub 4-2:1.0: USB hub found
[ 5283.351144] hub 4-2:1.0: 2 ports detected
[ 5283.637249] usb 4-2.1: new full-speed USB device number 4 using ohci_hcd
[ 5283.755208] usb 4-2.1: New USB device found, idVendor=11d4, idProduct=8333
[ 5283.755222] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5283.755231] usb 4-2.1: Product: X360USB PIO
[ 5283.755239] usb 4-2.1: Manufacturer: XECUTER
[ 5283.755247] usb 4-2.1: SerialNumber: NCC-1701-D
[ 5285.033250] usb 4-2.2: new full-speed USB device number 5 using ohci_hcd
[ 5285.135172] usb 4-2.2: not running at top speed; connect to a high speed hub
[ 5285.162258] usb 4-2.2: New USB device found, idVendor=11d4, idProduct=8336
[ 5285.162272] usb 4-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5285.162281] usb 4-2.2: Product: X360USB API
[ 5285.162290] usb 4-2.2: Manufacturer: XECUTER
[ 5285.162297] usb 4-2.2: SerialNumber: 000000000002
[ 5285.211494] Initializing USB Mass Storage driver...
[ 5285.219163] scsi6 : usb-storage 4-2.2:1.0
[ 5285.219404] usbcore: registered new interface driver usb-storage
[ 5285.219408] USB Mass Storage support registered.
[ 5286.225256] scsi 6:0:0:0: Direct-Access SPIF301 USB2SATA Bridge 0124 PQ: 0 ANSI: 2
[ 5286.228118] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 5286.249301] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Best regards