FIXED lite on drive flashing

[R3nwaUK]

hi the im in jungleflasher and everythink is wired up but the drive says this in jungleflasher can anyone help me please.



Sending Vendor Outro to port 0x0000
Drive is Lite-On..


Key found in KeyDB at record (1 - set up for jf)
Key is:
Key has been tested and verified, thanks C4eva !


the drive key is there in jungleflasher

Many Thanks In Advance

 

[BL4K3Y]

Has the drive been read/flashed on that computer before?

That is telling you that JungleFlasher was able to verify a drive key it found in the database against the key on the drive.

 

[R3nwaUK]

i was just trying to flash it i read it with probe 3 before this so key is in my keydb...
i also went to install LT3 but firmware wasn't in the folder hence this is what is happerning now..
and ty for your time much appreciated

 

[BL4K3Y]

i was just trying to flash it i read it with probe 3 before this so key is in my keydb...

That's fine.

You can use Dummy From KeyDB (I think) to build a Dummy.bin firmware for your drive using the drive key it found in the database.

I have never used the Dummy From KeyDB function, so I don't know exactly how it works.

 

[R3nwaUK]

yeah thats the issue im finding i cant seem to get key from bin to jungleflasher,
so i can finish it off lol. many thanks for your help.

Can anyone help me please it looks like all i have to do i move key from DB, some how to jungeflasher?

 

[BL4K3Y]

Can anyone help me please it looks like all i have to do i move key from DB, some how to jungeflasher?

There is an alternative solution.

If your console is on the latest dashboard, load the LT+ 3.0 firmware file in the target firmware box, click "Manual Spoofing", paste your drive key in the box, click "Check", click "OK" and there is your LT firmware prepared and ready to write to the drive.

If your console is not on the latest dashboard version, replace LT firmware with the correct stock firmware, write it to the drive, update your console and then build and write an LT+ 3.0 firmware.

 

[R3nwaUK]

There is an alternative solution.

If your console is on the latest dashboard, load the LT+ 3.0 firmware file in the target firmware box, click "Manual Spoofing", paste your drive key in the box, click "Check", click "OK" and there is your LT firmware prepared and ready to write to the drive.

If your console is not on the latest dashboard version, replace LT firmware with the correct stock firmware, write it to the drive, update your console and then build and write an LT+ 3.0 firmware.

Ok im going to try that. And yes my friend had it put kinnect in and it updated so i presume its latest dash..

 

[alexander_1333]

That's fine.

You can use Dummy From KeyDB (I think) to build a Dummy.bin

I can confirm that.

 

[R3nwaUK]

Ok this is were im at. I can put the key in the bottom box which is with the firmware.
but can manually do it to the top box, so when i goto lite on erase im not sure if i shoud continue or not.
or can i just write the firmware to drive without all the lite on erase.

i have team viewer if anyone wants to have a quick look let me know ty

 

[BL4K3Y]

Ok this is were im at. I can put the key in the bottom box which is with the firmware.
but can manually do it to the top box, so when i goto lite on erase im not sure if i shoud continue or not.
or can i just write the firmware to drive without all the lite on erase.

JungleFlasher writes what is loaded in to the target firmware box.

If the drive key matches and the firmware says LT+ 3.0, you should be good to go.

If you are still struggling, PM me your TeamViewer details and I will sort it for you.

 

[R3nwaUK]

ok i would like to say a BIG thanks to BL4K3Y for his time and patience and fixing everythink for me , lol you went off bit quick so didnt have time but ty man for your help it wont let me thank you under your posts...

 

[BL4K3Y]

ok i would like to say a BIG thanks to BL4K3Y for his time and patience and fixing everythink for me , lol you went off bit quick so didnt have time but ty man for your help it wont let me thank you under your posts...

No problem.

I deleted that LibUSB0 file from your JungleFlasher folder because it isn't required when you are using the X360USB Pro.