LITEON DG-16D2S Lite on drive not recognized

[TheMobb]

I followed a tutorial on flashing a lite on drive and when i pressed lite on erase i didnt turn my drive off and on now my drive isnt being recognized and i cant use my xbox any help????

 

[juanbrnt]

do you have the key on you comp?

 

[ninjadudexp]

you should be able to just press liteon erase again and turn your xbox on it off that time and it should work

 

[TheMobb]

yeah i have the key My drive isnt showing up in the I/O port menu

 

[onedumblonde]

What are you using to power your drive?


Sent while driving dangerously using Tapatalk

 

[TheMobb]

Im using my xbox 360

 

[L2000]

just press LO erase,turn off and on and everything should then be ok,load your key into LT fw and click write under MTK flash

 

[TheMobb]

Ok i tried And this happened

Drive key @ n/a E35EEA8D33BECCB704EA85FD5034A9A0
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: LITEON-AP25V3.0 DG-16D2S
Sending Lite-On-Erase request to port 0xE000
..............
Drive returned Status 0x50
....................
Device Intro failed!

 

[juanbrnt]

yeah i have the key My drive isnt showing up in the I/O port menu

save the key dont erase it try to load they key back and you should be ok

 

[TheMobb]

How do i do that

 

[juanbrnt]

Ok i tried And this happened

Drive key @ n/a E35EEA8D33BECCB704EA85FD5034A9A0
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: LITEON-AP25V3.0 DG-16D2S
Sending Lite-On-Erase request to port 0xE000
..............
Drive returned Status 0x50
....................
Device Intro failed!

load back the key then spoof the same key for now to have it stock again then hit write but make sure the drive is in vendor mode

 

[L2000]

change your sata cables,then load your dummy file(with key) into firmware tool of JF,if asked to auto load fw click yes,send LO erase if drive properties show re intro drive then proceed with write,after write outro drive...hope this helps
How long are you waiting after LO erase command is sent before you power cycle drive?

 

[TheMobb]

OK my dive is recgnized in vendor mode and i tried to LO erase this happened

Sending Lite-On-Erase request to port 0xE800
..............
Drive returned Status 0x72
Manufacturer ID: 0x0
Device ID: 0x0
Flash Name: Unknown type
Flash Size: n/a

 

[L2000]

Re intro the drive

 

[TheMobb]

hOW DO I LOAD THE DUMMY FILE WITH KEY IN JF

When i intro the drive i get an error Please return MRA hack to the normal position

 

[juanbrnt]

OK my dive is recgnized in vendor mode and i tried to LO erase this happened

Sending Lite-On-Erase request to port 0xE800
..............
Drive returned Status 0x72
Manufacturer ID: 0x0
Device ID: 0x0
Flash Name: Unknown type
Flash Size: n/a

ok one time you have it in vendor mode just go back to the firts screen firmware tool and hit open source and load you key a message will come just hit no then at the same screen right in the bottom hit open target and load the same key them hit spoof them write and outro it should recognized the drive

 

[L2000]

why does your JF ask you to return MRA to norm,to my knowledge 7 series LO's don't need MRA method?

 

[TheMobb]

Unknown flash type Write aborted

 

[TheMobb]

Sending Lite-On-Erase request to port 0xE800
..............
Drive returned Status 0x72
Manufacturer ID: 0x0
Device ID: 0x0
Flash Name: Unknown type
Flash Size: n/a
Unknown flash type Write aborted !

IT Wont Let Me Write The FirmWare