LITEON DG-16D4S - SLIM LiteOn 0225 Slim Drive, Bought 0272 Unlocked Winbond PCB.. Drive not opening !
- Thread starter mattymillz
- Start date
So if it came unlocked and everything, locking it will be okay ? No one touched it or anything, Its brand new unlocked PCB so, press the 0x00 because it says "if you dont know kamikaze hack dont lock spi)
---------- Post added at 04:45 ---------- Previous post was at 04:42 ----------
Sending Spi Lock request to Port 0x0000
Lock Failed !
Spi Status: 0x00
---------- Post added at 04:45 ---------- Previous post was at 04:42 ----------
Sending Spi Lock request to Port 0x0000
Lock Failed !
Spi Status: 0x00
x360ccm
BANNED
post a pic of the pcb a good clear close up.
we will soon tell you if it's had the kamakazi hack done on it.
lock the spi.
we will soon tell you if it's had the kamakazi hack done on it.
lock the spi.
Post a picture of your PCB so we can see what method has been used to unlock it
EDIT:- Kamikaze.....lols
What is your original PCB?
MXIC or Winbond
---------- Post added at 09:53 ---------- Previous post was at 09:53 ----------
MXIC or Winbond
---------- Post added at 09:53 ---------- Previous post was at 09:53 ----------
Its a kamikaze
If it won't eject sounds like a POUT fix is required......:mad2:
Still not 100% it's been flashed with the correct CFW
OP can you post your original JF log from when you read the drive?
EDIT:- I see it says dummy.bin is 0225 so next question is have you tried the 0225u CFW?
Loading firmware file C:\Users\MattyMillz\Desktop\XBOX\Slim\Dummy.bin
MD5 hash: ebd55c6443c8888e7b33deb5a64a26d6
Inquiry string found
Identify string found
Drive key @ 0xA030 A654
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: SlimKey Extract
Still not 100% it's been flashed with the correct CFW
OP can you post your original JF log from when you read the drive?
EDIT:- I see it says dummy.bin is 0225 so next question is have you tried the 0225u CFW?
Loading firmware file C:\Users\MattyMillz\Desktop\XBOX\Slim\Dummy.bin
MD5 hash: ebd55c6443c8888e7b33deb5a64a26d6
Inquiry string found
Identify string found
Drive key @ 0xA030 A654
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: SlimKey Extract
Last edited:
oh well okay then lol.. soo why can't i lock the PCB.. and the original ? it was a 0225, i don't know what it was..
I dont have the original fw log file, for some reason it didn't save for me...
All i honestly know is the original was a 0225, and the unlocked was a 0272...
EDIT: its a WinBond/NEX
---------- Post added at 05:01 ---------- Previous post was at 04:58 ----------
Yes i have tried the 0225u firmware, not to lock the SPi though, would locking the SPi could fix the eject drive situation?
I dont have the original fw log file, for some reason it didn't save for me...
All i honestly know is the original was a 0225, and the unlocked was a 0272...
EDIT: its a WinBond/NEX
---------- Post added at 05:01 ---------- Previous post was at 04:58 ----------
Yes i have tried the 0225u firmware, not to lock the SPi though, would locking the SPi could fix the eject drive situation?
Last edited:
Look at the chip on the original PCB
http://www.team-xecuter.com/forums/showpost.php?p=399226&postcount=1
If it is an MXIC [03] I would suggest getting a sputnik switch fitted
http://www.team-xecuter.com/forums/showpost.php?p=399226&postcount=1
If it is an MXIC [03] I would suggest getting a sputnik switch fitted
Don't worry about the new unlocked PCB it can be flashed with any of the CFW for Slim Lite-On drives :biggrin:
oh ! nice ! so what about the whole locking the SPi? i'm going to try 0225u and try the SPi lock and see what happens
TBH it should lock regardless of which CFW you have usedbut obviously will not work in console without the correct CFW :tongue:
I don't want to say for sure but it sounds like the new PCB is damaged (hence Kamikaze) but I don't know i that would stop the SPi from being locked
Did the person you bought it off say they had tested it before returning it to you (assuming you haven't done it yourself!!!) :rolleyes2:
no, i just bought off of ebay.. it said it was tested and working
edit:
used 0225u and it locked:
Sending Spi Lock request to Port 0x0000
Spi Status: 0x8C
edit:
used 0225u and it locked:
Sending Spi Lock request to Port 0x0000
Spi Status: 0x8C
Last edited:
x360ccm
BANNED
what did you mean by this post.
have you solder the 5 wires to the pcb.
how have you connected the 5 wires to the pcb...
Last edited:
As i mentioned about 4 times in this thread, i do not have a sodder, i don't know how to sodder and i feel that i am stuck without soddering them... touching the wires to the metal wont do a thing would it ?
How have you tested the new (Kamikaze'd) PCB in the drive if you haven't soldered the wires
Seeing as you have the right tools to flash and the JF log looks good I would say the PCB is FUBAR :mad2:
Your only recourse is to ask for your money back but now that you have flashed it the seller could say it's down to user error :mad2:
well I turned on the xbox and it turns on and everything but the onlything was the drive didnt open.... thats all
OK that's good we got progress :biggrin:
Now you need to find someone to solder the five wires onto the PCB for you....:tongue: