LITEON 74850 Liteon 74850c Custom Flash alwys erased by Xbox on 13599 Dash

[Aceman86]

Hi there,
Iam using x360usb Pro with Ck3 Pro and Probe 3 V3 on Win7 64-Bit.

And now my Issue

I got a Xbox360 with Falcon Board and Liteon 74850c Drive in it.
I´ve dumped the original Key from this drive because it was broken.
After that i updated to 13599.
After that i took a Benq Drive and spoofed it to the Liteon.
It worked, but only for one disc after that he didn´t took even originals.
So i took a new 74850c and flashed it to 02510C Firmware, containing the right Key.
When i´ve put it into my Xbox everything worked fine.
After a reboot .... the same Problem!!!! He didn´t read anything.
I think he´s deleting the LT+ and all the flash on the drive, after a reflash everything worked fine for only 1 Time. After that... again deleted.

Pls help meeee!!! What I´m doing wrong??

 

[GhostFace606]

What error, play DVD or open tray ect.

Post the j.f. Log of you programing the new lite-on

 

[Aceman86]

he´s spinning and spinning and after a while he says : eject Disc!!

 

[lockpicker]

have you checkd your laser

 

[GhostFace606]

he´s spinning and spinning and after a while he says : eject Disc!!

Was you able to complete the dash update?

Post the jf log so we all can help you,that should be mandatory when asking for help.

Where did you purchase the new drive?
Can you confirm if the laser powers up!,and moves.

 

[Aceman86]

You can Call me stupid, but I didn't Save the jf log but i can describe how I have flashed it.
I Took the Stock 74850c firmware As Source And the ltplus 25v1.91 As Target.
Then i Hit the spoof Button And i got a Message about Not copying a Key, because it's Not necessary ( i think because of 74850 And the 2510c now).
Then i flashed As always.

 

[piromaniac]

Hold on a sec correct me if I'm wrong but you've spoofed your liteon with a benq I thought that was a no go area after the new dash..
You will need to post a jf log in order for someone to help you you can go back and retry, obviously you need the key for your original liteon in order for it to work.

 

[Goldensavage]

When you say you took the stock lite on as source and then 1.91 as your Target. Your original key would not be there.

Stock firmware comes with either all 7's or f's

I know you said it plays one game. But doing it the way you describe would not give you your correct key on the drive.

 

[Aceman86]

Oh i made a mistake
At First i have Read out the flash of the Stock Liteon 74850.
Then i have spoofed the BenQ with this Liteon Key.
After that i Took the New 74850 And flashed it with the 02510c Firmware with the Key from the First Stock Liteon within.
That should describe it

 

[Goldensavage]

The source firmware should be the one you originally saved when extracted the key.

Then you can load your target firmware and spoof.

 

[Suicyde]

It's not supported, but a spoofed drive will still work.