LITEON 74850 Liteon 74850c Intro

P

PhantomTa2

Junior Member
Apr 25, 2010
21
0
Hey, hopefully someone can help here.
I'm using a CK3 lite, VIA 6421a card and have used this setup to flash a Sammy and a BenQ. I've used the card many times but the CK3 lite is new and only used twice.
I just can't get a Liteon 74850c to intro, I've been trying for the better part of 2 days now, googling like crazy but have found nothing that's made it work. The VIA card in Device Manager has an exclamation mark on it, so the drivers for the VIA are not being used and the drive is half-open.
I'll paste the log onto here so hopefully someone who knows more than me might be able to tell me where I'm going wrong.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.87 Beta (277)
Session Started Fri Sep 30 11:58:03 2011

This is a 32 bit process running on a 32 bit CPU
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 8 I/O Ports.
Found 2 Com Ports.
Found 3 windows drives A: C: D:
Found 1 CD/DVD drives D:

Drive is Lite-On..
Drive is Lite-On..
Sending Vendor Intro to port 0xA000
Status 0x51
Re-sending Vendor Intro:
.......................................................................................................................................................................................................................................................
Device Intro failed!
 
lockpicker

lockpicker

VIP Member
Oct 26, 2010
738
0
Ulster :-D
2 says of searching and no result..1 day order of usbpro and hassle free flashing, all done in about 30 seconds
 
C

cha0sriderx

Senior Member
Sep 2, 2011
129
0
if u dont have the key already for the liteon drive u will also need to order a probe 3 to get the key.
 
P

PhantomTa2

Junior Member
Apr 25, 2010
21
0
cha0sriderx said:
if u dont have the key already for the liteon drive u will also need to order a probe 3 to get the key.
Click to expand...
Already have the key, but I have a Probe 3, just in case. I shouldn't have to use it, though, if I have the firmware key already, should I?
 
C

cha0sriderx

Senior Member
Sep 2, 2011
129
0
nah if u have the key already then u dont have to worry about it.

and are u clicking intro or liteon erase?
 
P

PhantomTa2

Junior Member
Apr 25, 2010
21
0
Just clicking Intro. I've tried erase and write but it gives me an invalid status.
I've noticed something else, and I don't know if it's relevant so I'll tell you, in case it is. When I power cycle the drive and it won't intro in JF, even after closing JF, it won't even eject until I power it on and off again through the CK3 lite
 
P

PhantomTa2

Junior Member
Apr 25, 2010
21
0
Will do, I still have a previous version so can try that.
Thanks for the input, guys, it is appreciated :)
 
D

diaboliq20

VIP Member
Jun 23, 2011
3,497
0
Scotland
don't bother with google....HERE
shows a x360USB but same principle

in the guide it shows the port as 0x0000 but obviously u would use your SATA port
 
Last edited:
brett1

brett1

VIP Member
Apr 23, 2011
648
48
kernow, uk
not trying to be silly here but if you have the key on the pc then if you go firmware 32 open key db and your key will be in there highlight and export, and should be there then you can carry on flashing it
 
D

diaboliq20

VIP Member
Jun 23, 2011
3,497
0
Scotland
brett1 said:
not trying to be silly here but if you have the key on the pc then if you go firmware 32 open key db and your key will be in there highlight and export, and should be there then you can carry on flashing it
Click to expand...
intro'ing the drive is the issue tho mate
 
You must log in or register to reply here.