Liteon 74850c - Jungle Flasher Tutorial

Status
Not open for further replies.

JammyJules

VIP Member
Jan 22, 2010
236
0
I notice that my version has not the selector to change from usb to com. Can I extract liteon 74xx key using usb?
Yes you can ... install the CK3 drivers and away you go.
 

drake200sx

VIP Member
Sep 30, 2010
325
0
www.gamemalta.webs.com
Hi guys, i have Lt1.1 and wanted to update to LT+ and when i try dummy from my extreme it's says open with half tray open but no success as this is already been flashed!! 74850c drive. in jf 1.76 i have everything even the key is shown verifyed!!
 

davidgrohl

Full Member
Nov 24, 2010
44
0
I've a problem: when I power on CK3 pc crashes.
The light on ck3 has to be red or blue?
Please help me!
 

rmac33

Noob Account
Jul 15, 2010
1
0
I am trying to update my drive to the new LT+ but another guy flashed the drive in the first place so i dont have the drive key or the original firmware and the ck3 probe 2 doesnt light up green when i try to read the r707 hole but when i touch another hole it lights up green so i know the probe works. I try to dummy from ixtreme and it says it cant make sure the drive is half way open but it is. Its really frustrating plz i need some help
 

kalnai

Noob Account
Dec 2, 2010
2
0
I'm flashing 7 series drive with jungle flasher from original firmware to LT+. When it asked to save serial, key, etc. bin files, I saved them to my desktop (like an idiot). Then jungle flasher froze and then my computer froze. I rebooted computer and the 5 bin files are on my desktop, but I don't know how to proceed. I tried to use dummy bin from desk top as source and it asks do you want to auto-load ixtreme and I click yes and it says the bin files are copied, but then says no calibration data in source data and stops there. Thanks in advance for any help.
 

Absinthe

Full Member
Dec 14, 2010
78
0
would there be anyway if someone who has done this before and know how to do it easy can step by step walk me through this on msn or skype or something? thanks
 

Absinthe

Full Member
Dec 14, 2010
78
0
isn't the guide itself step by step ?

What are you stuck on ?
it is and i havent recived me ck3 probe or pro yet oso i havent started its just nice for someone to talk to wheile doing it so everyhting works out fine
 

bdemutis

Noob Account
Dec 16, 2010
6
0
hi i was wondering if any one could help me i baught the ck3 blaster for my lite on 74850c i hooked everything up right everything shows up in jungle flasher but every time i go to extract the key i get a serial data is bad can any one help
 

bdemutis

Noob Account
Dec 16, 2010
6
0
well could you help me i tied probeing it so many times and when i click via ports it says no via ports found
 

ikn0wst3v3n

Junior Member
Dec 21, 2010
15
0
Hey i got to the part where you write the drive, but the write verified failed? Everything looks identical to the tutorial. What should i do from here?
 

scottishdude

Junior Member
Dec 21, 2010
13
0
Did it extract the key ok first time, ie all your ports were configure, also post what hardware and software your using, ie ck3 pro or lite, just help the guys work out how you encountered problem!

Also your meant to start your own thread dude, as this is a closed thread meant to be kept clean, just for future reference, place it in the correct forum as you'll get better support as this is not looked at for this purpose, it's a tutorial.

Mod please move as appropriate

Kind regards
 
Last edited:
Status
Not open for further replies.