LITEON 74850 Liteon 74850C to 02510C

[cchki]

I´m trying to flash stock 02510C, but JF says "The target f/w does not appear to match..."

I have 2.0.13599.0 dashboard, but my liteon drive shows 74850C..

The problem is, I can´t update dashboard again, so how can I get my liteon to 02510C ?

 

[cchki]

So i just went ahead and flashed my drive, but I´m stuck here. Writing went well, but when hitting outro, I dont get key verified announcement..

Loading firmware file C:\JungleFlasher v0.1.88 Beta (280)\firmware\LTPlus-025-v2.0.bin
MD5 hash: 0264149996f783b54629c1598072e50e
Genuine LT plus v2.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 2.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target

Target rev is LT 02510C, serial info not copied

Sending Lite-On-Erase request to port 0xEC00
..............
Drive returned Status 0xD0
...........
Serial flash found with Status 0x72
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Getting Status from port 0xEC00
SPi flash found with Status 0x72

Sending Chip Erase to Port 0xEC00
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0xEC00
Drive is Lite-On..

 

[Lizardpcs]

sorry read that wrong you have spoofed it

Click outro a few times and them try it in the Xbox log looks alright

 

[brett1]

did you spoof to target there ?? you need to flash 74850 to stock 02510c then to lt 2.0 always to stock then to flash

 

[cchki]

So, first I need to flash "orig-74850C-1a000" with this? Then LT+ 2.0? That didn´t work.

This is what I have done (My drive was allready flashed to 1.67, when extracting the key):
1. Extracted the key
2. Updated latest dashboard
3. Tryed to flash LT+ 2.0 (got stuck, when hitting outro)
4. Tryed to flash LTPlus-748v1.1 (That worked perfect)
5. Tryed to flash LT+ 2.0 (now jf sayd that f/w does not match etc..)

I have tryed to flash to stock with this "orig-02510C-1c000", but I cant get key verified, after hitting Outro

Yes, I have spoofed the target

 

[talby71]

if you are already on dash 13599 it must be a 02510c no longer 74850
in your jf log it looks like you have 02510c lt+2.0 as source(not your key) as well as target

 

[cchki]

Even jf didnt verified the key, I tryed to put dvd drive back to my xbox and tryed to play GOW3, it works fine. So everything is good now

 

[talby71]

well that's good, if it was old dummy.bin file (before 13146 dash) that might be why