LITEON 74850 Liteon DG-16D2S 74850C Died while flashing

L

laststar

Full Member
Oct 3, 2011
30
0
ok so i'm pretty new to flashing, i have been using the x360usb pro, CK3 probe,

I flashed my drive to 1.91 2 days ago with no problems, however when trying to flash to 2.0 this morning the drive seams to have died.

I extracted the key in jungle flasher followed all the steps and after liton erase the drive no longer shows up in jungle flasher.

Im at odds what to do now? any ideas?
 
L

laststar

Full Member
Oct 3, 2011
30
0
i dont seam to have one, the only log is the one from two days ago for 1.91
 
Last edited:
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
You would have had a log unless JF actually crashed on you. Without the log it's hard to say what went wrong.

Have you tried sending Lite-on Erase again?
 
L

laststar

Full Member
Oct 3, 2011
30
0
i don't think it crashed, i think i accidentally quit jf without saving the log,

i can't try the erase again as the drive does not show up in jungle flasher, it says vender : No drive detected
 
L

laststar

Full Member
Oct 3, 2011
30
0
Martin C said:
You say you extracted the key. How did you do this?
Click to expand...
I loaded jf 1.88, Clicked DVDkey 32, Selected usb ports only, ticked dummy.bin only and hit the phatkey button.

I then followed the instructions on screen using the probe 3, this gave me a dummy.bin file in a folder.

I also have a Lite_CFW.bin file in this folder aswell.

My next steps were following the instructions jf gave me to flash to LT2.0, i then went to Lite-on Erase then Intro/Device ID/Write.

It's at this point that something has gone wrong.
 
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
Load your previous dummy.bin as the source firmware, load LTPlus-025-v2.0.bin as the target, click Spoof Source to Target and make sure both drive keys match, run Lite-On Erase following the prompts, click Write and finally click Outro/ATA Reset a couple of times.
 
Last edited:
L

laststar

Full Member
Oct 3, 2011
30
0
diaboliq20 said:
After Lite-on erase you don't need to reintro....just write

have u tried outro'ing the drive and retried Liteon erase?
Click to expand...
I have tried both but the drive is not detected in jf, it returns a status0x80

---------- Post added at 02:54 ---------- Previous post was at 02:53 ----------
diaboliq20 said:
After Lite-on erase you don't need to reintro....just write

have u tried outro'ing the drive and retried Liteon erase?
Click to expand...
blakey8 said:
Load your previous dummy.bin as the source firmware, load LTPlus-025-v2.0.bin as the target, click Spoof Source to Target and make sure both drive keys match, run Lite-On Erase following the prompts, click Write and finally click Outro/ATA Reset a couple of times.
Click to expand...
I have just tried this, i just get Status0x80 & no drive detected in the vender box
 
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
I'm going to assume you are using a CK3...... When JungleFlasher asks you to power cycle the drive, turn your CK3 off, wait until you see the drive status change and then turn it back on. It should Intro correctly and go into Vendor mode.
 
D

diaboliq20

VIP Member
Jun 23, 2011
3,497
0
Scotland
So - u have it outro/ata reset?
powered off the drive?
try restarting JF at this point - save any logs u have.
then try hitting Liteon erase after powering drive back up
 
L

laststar

Full Member
Oct 3, 2011
30
0
right drive is now showing in vendor mode,

Flash chip properties are as follows
Vendor id: 0x0
Device id: 0x0
Name: unknown type
Size: n/a
Type:


So what do i do next?
 
L

laststar

Full Member
Oct 3, 2011
30
0
diaboliq20 said:
have u sent the Liteon erase command? - If so try writing to the drive after loading your dummy.bin as source and LT+ as target and spoofing to target
Click to expand...
Comes back with unknown flash type write aborted?

---------- Post added at 03:12 ---------- Previous post was at 03:05 ----------

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.88 Beta (280)

Session Started Mon Oct 03 10:50:20 2011



This is a 32 bit process running on 2 x 32 bit CPUs

X360USB PRO detected, Version 0.18



Found 1 I/O Ports.

Found 0 Com Ports.

Found 3 windows drives C: D: F:

Found 0 CD/DVD drives



Loading firmware file C:\Documents and Settings\Sy\My Documents\Xbox 360\Dummy.bin

MD5 hash: b80c0c5426***************

Inquiry string found

Identify string found

Drive key @ 0xA030 105146040****************

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: PhatKey Extract

Auto-Loading firmware file C:\Documents and Settings\Sy\Desktop\JungleFlasher v0.1.88 Beta (280)\firmware\LTPlus-025-v2.0.bin

MD5 hash: 0264149996**************

Genuine LT plus v2.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: LT-Plus 2.0

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied

Spoofing Target

DVD Key already matches

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied



Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x80

....................

Device Intro failed!



Getting Status from port 0x0000

Invalid Status 0x80



Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x80

....................

Device Intro failed!

Spoofing Target

DVD Key already matches

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied



Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x72

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name: Unknown type

Flash Size: n/a

Spoofing Target

DVD Key already matches

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied



Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x72

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name: Unknown type

Flash Size: n/a

Unknown flash type Write aborted !

Loading firmware file C:\Documents and Settings\Sy\My Documents\Xbox 360\Dummy.bin

MD5 hash: b80c0c5426*****************

Inquiry string found

Identify string found

Drive key @ 0xA030 10514604****************

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: PhatKey Extract

Auto-Loading firmware file C:\Documents and Settings\Sy\Desktop\JungleFlasher v0.1.88 Beta (280)\firmware\LTPlus-025-v2.0.bin

MD5 hash: 0264149996f783***************

Genuine LT plus v2.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: LT-Plus 2.0

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied

Spoofing Target

DVD Key already matches

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied



Target f/w saved as: Lite_CFW.bin



Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x72

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name: Unknown type

Flash Size: n/a

Unknown flash type Write aborted !

Spoofing Target

DVD Key already matches

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied

Unknown flash type Write aborted !

Spoofing Target

DVD Key already matches

Target is LT - ID strings not copied to Target

Serial data already matches



Target rev is LT 02510C, serial info not copied
 
L

laststar

Full Member
Oct 3, 2011
30
0
blakey8 said:
Run Lite-On erase until you get the SPI detected (Status 0x72).
Click to expand...
Whats SPI?

It gives drive returned status 0x72
mf ID: 0x0
Device ID: 0x0
Flash name: Unknown type
Flash size: n/a


In the flash chip properties it gives
Vendor Id: 0x0
Device id: 0x0
Name: Unknown type
Size: n/a
Type: Status 0x80

Im totally lost as to what to do, it wont let me exstract the key again as it says its in vendor mode?
 
You must log in or register to reply here.