Liteon DG-16D2S 93450C - Step-By-Step Guide (With CK3 Probe 3)

xboxerSlim

VIP Member
Mar 4, 2011
251
0
India
Sorry posted in the wrong section.
Post cleared of the data that was input before.
 
Last edited:

drake200sx

VIP Member
Sep 30, 2010
327
0
www.gamemalta.webs.com
Hi can i use CK3 Probe 2 or i have to buy CK3 Probe 3 to Flash the 93450c its virgin and i see video and read jf too just to be 100% i connected everything like this tut excluding the probe 3 as before i buy the usbpro they tell me that i dont need the ck3 as i had the ck2!
 

N.E.Modz

VIP Member
Sep 27, 2009
2,301
68
A.K.A daleh43
Hi can i use CK3 Probe 2 or i have to buy CK3 Probe 3 to Flash the 93450c its virgin and i see video and read jf too just to be 100% i connected everything like this tut excluding the probe 3 as before i buy the usbpro they tell me that i dont need the ck3 as i had the ck2!
yes you can, you can do the mra hack which involves cutting traces and connecting back up after obtaining key, or you can make the probe v2 into a PMT probe.

look here: http://team-xecuter.com/forums/showthread.php?t=64242&highlight=pmt

dale;)
 

xbox360mod

VIP Member
Dec 25, 2010
559
0
Ontario,Canada
Hi can i use CK3 Probe 2 or i have to buy CK3 Probe 3 to Flash the 93450c its virgin and i see video and read jf too just to be 100% i connected everything like this tut excluding the probe 3 as before i buy the usbpro they tell me that i dont need the ck3 as i had the ck2!
i would just buy the probe 3 man, it worth it, it makes everything so much easier. thanks to team xecuter for that and there awesome work!
 

drake200sx

VIP Member
Sep 30, 2010
327
0
www.gamemalta.webs.com

dpcragg

VIP Member
Mar 6, 2010
653
0
up2 u either buy the conversion cable for ur probe 2 or buy the probe 3 either way will be ok
 

elkilar

Noob Account
Mar 14, 2010
3
0
quick question why do you check the only dummy bin. Isn't better not to check it that way you will have your key and fw and everything for nest time?
 

drake200sx

VIP Member
Sep 30, 2010
327
0
www.gamemalta.webs.com
4. Extract Complete will be then pop up after a couple of seconds (See image below). Now Remove the CK3 Probe 3 from MPX01. Press and Release the Probe 3 button again then click OK

Till there is fine but than i have PhatKey extraction failed!
Im using Probe 3 360USBPro and ck3!!
360USBPro is lightning Green next the usb port and Red Light next to SATA !!! i dont know if its normal !!
and this 93450c is virgin drive so in my JF is showing (DVD KEY NOT FOUND) !!!
and on this tut its shown verified and even i watch some video using same material it's verfied too.

JungleFlasher 0.1.82 Beta (234)
Session Started Fri Jun 03 21:39:08 2011

This is a Wow 64 process running on 4 x 64 bit CPUs
X360USB PRO detected, Version 0.17

portio64.sys Driver not Installed
Found 15 I/O Ports.
Found 4 Com Ports.
Found 9 windows drives C: D: E: F: G: H: I: J: K:
Found 3 CD/DVD drives D: E: G:

Drive is Lite-On..
Drive is Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
..................
Serial flash found with Status 0x52

Extracted drive key failed Verification !


PhatKey extraction failed!

Drive is Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
...........................
Serial flash found with Status 0x52

Extracted drive key failed Verification !


PhatKey extraction failed!

Drive is Lite-On..
Drive is Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
............................
Serial flash found with Status 0x52

Extracted drive key failed Verification !
 

IMod4$

Noob Account
Jun 5, 2011
2
0
This is my first post, I'm sorry if this has been answered or is covered another topic.

Ok, can I use my CK3 Probe 3 without the CK3 Pro or XBOX360 USB Pro?
I power the drive using my XBOX360...Its is a Lite-on 9 series...

How would I go about powering the CK3 Probe 3 and using it without the other tools?
I'm using a VIA VT6421A IDE SATA RAID PCI Controller Card...
 

suntu ieu

VIP Member
Nov 27, 2010
159
0
München
Sorry for stupid question.. maybe i missread something.. but what i have to do with X360USB PRO firmware ? Just put it in jungleflasher's folder( put firmware here)..



BTW My XBOX USB PRO arived 1 week ago.. :)
 

wadio87

Junior Member
Dec 17, 2010
24
0
Hi guys, thanks for the guide, it is really simple and well done, but unfortunately i get errors when i try to flash my liteon 93450C...

I post here some pictures, maybe they will help more than words :)








I hope that someone can help me flashing this drive :)

Thanks to all!