Liteon DG-16D2S 93450C - Step-By-Step Guide (With CK3 Probe 3)

Hi guys, thanks for the guide, it is really simple and well done, but unfortunately i get errors when i try to flash my liteon 93450C...

I post here some pictures, maybe they will help more than words :)

Link To Image
I hope that someone can help me flashing this drive :)

Thanks to all!
It looks like in that 3rd picture that you have your probe backwards. It should be like this:

CK3[]---------------------------swItch--[]DVD
 

wadio87

Junior Member
Dec 17, 2010
24
0
PS: this is my JF log file, hope will help

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


JungleFlasher 0.1.84 Beta (250)


Session Started Mon Mar 25 09:52:16 2002





This is a 32 bit process running on 2 x 32 bit CPUs


portio32.sys Driver Installed


portio32.sys Driver Started, thanks Schtrom !


Found 6 I/O Ports.


Found 2 Com Ports.


Found 1 windows drives C:


Found 0 CD/DVD drives





Drive is Lite-On..


Sending Vendor Intro to port 0xA400


Status 0x51


Re-sending Vendor Intro:


.


Serial flash found with Status 0x52





Extracted drive key failed Verification !








PhatKey extraction failed!











~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


JungleFlasher 0.1.84 Beta (250)


Session Started Mon Mar 25 10:16:18 2002





This is a 32 bit process running on 2 x 32 bit CPUs


portio32.sys Driver Installed


portio32.sys Driver Started, thanks Schtrom !


Found 6 I/O Ports.


Found 2 Com Ports.


Found 1 windows drives C:


Found 0 CD/DVD drives





Drive is Lite-On..


Sending Vendor Intro to port 0xA400


Status 0x51


Re-sending Vendor Intro:


.


Serial flash found with Status 0x52





Extracted drive key failed Verification !








PhatKey extraction failed!











~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


JungleFlasher 0.1.84 Beta (250)


Session Started Mon Mar 25 11:18:44 2002





This is a 32 bit process running on 2 x 32 bit CPUs


portio32.sys Driver Installed


portio32.sys Driver Started, thanks Schtrom !


Found 6 I/O Ports.


Found 2 Com Ports.


Found 1 windows drives C:


Found 0 CD/DVD drives





Drive is Lite-On..


Drive is Lite-On..


Sending Vendor Intro to port 0xA400


Status 0x51


Re-sending Vendor Intro:


.


Serial flash found with Status 0x52





Extracted drive key failed Verification !








PhatKey extraction failed!
 

FlashDrive360

VIP Member
May 17, 2011
440
0
dont power of the drive with the ck3 power off the drive with the switch on the probe cable
 

stamati76

Full Member
Sep 11, 2009
26
0
London
Hi,

I am flashing a Lite-on. Jungleflasher read the firmware as 9345. But i am not next to the drive and didnt look on the drive.

A couple of years ago i bought the ck3 kit. When i try and extract the key using the probe i get 'phatkey failed'.

I am using a VIA 6421 Sata card.

I just wanted to clarify that is it not extracting the key because i need a 'new' version of probe? There is no version number on mine.

Really appreciate any help.
 

stamati76

Full Member
Sep 11, 2009
26
0
London
No it doesnt have a version number, so i presume it's an old version. However i remember years ago flashing my liteon and there was the a 'close the dvd tray half way' trick.

Does my older ck3 pro fit the probe 3?

Lastly, i have read through some of the forums and a lot of people refer to a 3.3v switch and on some of their pictures there is a soldered switch on the cable going from the dvd drive to the ck3 pro... I think i've just become confused with the constant evolving methods..
 

wadio87

Junior Member
Dec 17, 2010
24
0
Hi guys, im here again, but just to say a big THANK YOU! :)

I have flashed the LiteOn 93450C with the latest iXtreme and works like a charm !!!

Team Xecuter Forum: you rock!

keep it up!!!!!!
 

Goldensavage

VIP Member
Jul 26, 2009
3,340
0
Essex, UK
I have the CK3 Pro Kit Version 1. If i just buy the conversion cable will this allow me to get the 'phatkey', or do i need to get anything else?

http://www.ck3.co.uk/xecuter_probe-3_pmt-conversion-cable.html
When you say ck3 pro kit 1. Do you mean the bundle kit?

or you just have the ck3 pro.

if you have the bundle kit. it comes with a probe 3 from ck3.co.uk.

But if you just have the ck3 pro, then you will need the complete probe 3. not just the cable as linked
 

stamati76

Full Member
Sep 11, 2009
26
0
London
That's confusing because it says

"The Xecuter Probe 3 / PMT Conversion cable will convert ANY Xecuter Probe v1, v2, v2.1 or mini-probe to a fully working CK3 Probe 3."
 

stamati76

Full Member
Sep 11, 2009
26
0
London
Good idea..

I've taken a photo of what i have...

What else do i need to get the 'phatkey", and finish the job?

 
Last edited:

Andrev

Junior Member
Oct 5, 2009
18
0
Portugal
Re: Liteon DG-16D2S 93450C - Step-by-Step Guide

Im having problems with my Probe 3. Once it gets to second part where it says to power off etc. I remove and press and release the probe button the click OK. after about 30 seconds it says phatkey failed. When i refresh my drive in jungle flasher it says drive not detected. Then i have to power off and power on my CK3 pro to get it to be detected again. Any ideas?
I have the same problem, i look into all Lite on 93450 thread's in this Forum and dont see anyone talk about this problem : (

I have CK3 PRO with Probe 3.
The drive is detected, i do Phatkey, press Yes and then press the probe 3 button, put the probe 3 in MPX01 , release the probe 3 button and wait ........
Phatkey failed !

To try this again i have to turn off the CK3 because my drive is not detected : \

Anyone can help me please ?

Thanks