LITEON 0225 Liteon DG-16D4S 0225 false unlock now wont unlock

[spank127]

I have a 16D4S that I attemted to kamikaze. I got the unlocked 0x00 status, and into'd it to make sure it wasn't a false unlock. Well when I intro'd it again, it no longer will give me the unlocked status. I tried the rubbing alcohol trick and still no luck. I cant find the original JF log put here is the last one....
Any help will be appreciated. Thanks

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


JungleFlasher 0.1.92 Beta (304)


Session Started Mon Aug 05 19:26:08 2013






This is a 32 bit process running on 2 x 32 bit CPUs 


X360USB PRO detected, Version 0.18






portio32.sys Driver Installed 


portio32.sys Driver Started, thanks Schtrom ! 


Found 7 I/O Ports.


Found 1 Com Ports.


Found 10 windows drives C: D: E: F: G: H: I: J: K: M:


Found 4 CD/DVD drives G: H: K: M:






Sending Vendor Intro to port 0x0000


Status 0x51


Re-sending Vendor Intro: 


.


Serial flash found with Status 0x72






Sending Device ID request to port 0x0000


Spi Status: 0x8C


Manufacturer ID: 0xEF


Device ID: 0x11


Flash Name:  Winbond/NEX(W25P20/NX25P20)


Flash Size:  262144 bytes






Sending Spi UnLock request to Port 0x0000


....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................


Sending Spi UnLock request to Port 0x0000


...........................................................................................Sending Vendor Outro to port 0x0000


Drive is Slim Lite-On.. 


...........................

 

[L2000]

Did you slimkey the drive before you started the kamikaze on it, if not I'd strongly suggest that you do that before you go on drilling any further,or do anything else.Once you have all your necessary files from slim key,close down Jungleflasher,then start the whole procedure over again,first try the unlock using isopropyl,if that fails try unlocking with electric lighter,and as a last ditch attempt CAREFULLY redrill VERY SLOWLY at your point,it should unlock (if your point is spot on).then follow prompts in JF pdf

 

[BL4K3Y]

I can't see anything in that log that tells me the SPI was unlocked.

Did you hear the "beep" in JungleFlasher to tell you that the SPI was unlocked?

Update the firmware on your X360USB Pro before you do anything else (this probably won't matter, but it helps if everything is updated).

 

[gazcoigne]

i get false beeps all the time from JF its a nightmare

faulty USB cable to 360usbpro will throw a duff beep

as stated above slimkey the drive first so if it does go tits up you dont have to go down the RGH route

 

[spank127]

Did you slimkey the drive before you started the kamikaze on it, if not I'd strongly suggest that you do that before you go on drilling any further,or do anything else.Once you have all your necessary files from slim key,close down Jungleflasher,then start the whole procedure over again,first try the unlock using isopropyl,if that fails try unlocking with electric lighter,and as a last ditch attempt CAREFULLY redrill VERY SLOWLY at your point,it should unlock (if your point is spot on).then follow prompts in JF pdf

Thanks for your response,
Yes I slim keyed it before starting. I have started the whole process again with no luck. Im not sure what the electric lighter trick is, but I took a regular lighter and created a spark, but still no luck. I will post my new JF log and thanks again

 

[spank127]

Yes on the initial try I slim keyed the console, proceeded as normal, heard the beep, but when I re-intro'd it to make sure it wasn't a false unlock, it returned with the 0x8c status and now will not unlock. Im posting my last JF log. I have searched for the x360usb pro update but im coming up empty. I man be on the latest but not sure. Thanks again for your help.

- - - Updated - - -

I will try another usb cable later when im home from work. Thanks for your help and suggestions.

 

[spank127]

Here is the log from my last attempt........

JungleFlasher 0.1.92 Beta (304)


Session Started Tue Aug 06 12:29:31 2013

This is a 32 bit process running on 2 x 32 bit CPUs 

X360USB PRO detected, Version 0.18






portio32.sys Driver Installed 
portio32.sys Driver Started, thanks Schtrom ! 
Found 7 I/O Ports.
New CD/DVD detected.
Found drive C: - Hard Drive.
Found drive D: - Hard Drive.
Found drive E: - Hard Drive.
Found drive F: - Hard Drive.
Found drive G: - CD/DVD.
Found drive H: - CD/DVD.
Found drive I: - Removable.
Found drive J: - Hard Drive.
Found drive K: - CD/DVD.
Found drive M: - CD/DVD.
No Hitachi drives were found!
Found 1 Com Ports.
Found 10 windows drives C: D: E: F: G: H: I: J: K: M:
Found 4 CD/DVD drives G: H: K: M:


Drive is Slim Lite-On.. 










0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS    


0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S        


0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............


0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........


0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0060: 44 37 31 34 43 47 31 30 - 32 38 30 33 30 30 35 46 D714CG102803005F


0070: 43 20 20 20                                       C               






Sending Vendor Intro to port 0x0000


Status 0x51


Re-sending Vendor Intro: 


............


Serial flash found with Status 0x72






Sending Device ID request to port 0x0000


Manufacturer ID: 0xEF


Device ID: 0x11


Flash Name:  Winbond/NEX(W25P20/NX25P20)


Flash Size:  262144 bytes


............


Key: 4FB1CC37F210879BA72BD0EE73FD5978 is verified, Thanks C4eva






Grabbing Key sector: ................


Key Sector verified.


Grabbing Serial info: ........






Drive is Slim Lite-On.. 


0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS    


0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S        


0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............


0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........


0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0060: 44 37 31 34 43 47 31 30 - 32 38 30 33 30 30 35 46 D714CG102803005F


0070: 43 20 20 20                                       C               






0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0010: 00 00 00 00 37 44 34 31 - 47 43 30 31 38 32 33 30 ....7D41GC018230


0020: 30 30 46 35 20 43 20 20 - 00 00 00 00 00 00 32 30 00F5 C  ......20


0030: 35 32 20 20 20 20 4C 50 - 53 44 20 20 20 20 47 44 52    LPSD    GD


0040: 31 2D 44 36 53 34 20 20 - 20 20 20 20 20 20 00 00 1-D6S4        ..


0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0060: 00 00 00 0F 00 40 00 04 - 00 02 06 00 00 00 00 00 [email protected]


0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


0080: 03 00 78 00 78 00 78 00 - 78 00 00 00 00 00 00 00 ..x.x.x.x.......


0090: 00 00 F8 00 10 02 00 00 - 02 02 00 00 60 00 40 00 ............`[email protected]


00A0: F8 00 10 02 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


00B0: 3F 20 00 00                                       ? ..            






0000: 44 37 31 34 43 47 31 30 - 32 38 30 33 30 30 35 46 D714CG102803005F


0010: 43 20 20 20 FF FF FF FF - 31 41 30 34 30 31 30 33 C   ....1A040103


0020: 31 36 35 30 35 58 58 52 - 41 30 FF FF 53 34 50 31 16505XXRA0..S4P1


0030: 31 30 36 30 30 30 30 30 - 30 33 35 31 34 33 00 00 10600000035143..


0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 41 30 FF FF ............A0..






Hashing Drive: ................






Dummy.bin file saved to OFW080613.bin


Loading firmware from buffer


Inquiry string found


Identify string found


Drive key @ 0xA030 4FB1CC37F210879BA72BD0EE73FD5978


Firmware Osig: [PLDS    DG-16D4S        0225]


Firmware is:  SlimKey Extract                 


Key added to database






Auto-Loading firmware file C:\Documents and Settings\Desktop\360 STUFF\JungleFlasher.0.1.92.Beta(304)\JungleFlasher v0.1.92 Beta (304)\Firmware\LTPlus-0225-v3.0.bin


MD5 hash:  1a38d3a2a6519339599fa1866642c513


Genuine LT plus v3.0


Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF


Firmware Osig: [PLDS    DG-16D4S        0225]


Firmware is:  LT-Plus 3.0                     


Spoofing Target


DVD Key copied to target


Key Sector copied from Source to Target


Target is LT - ID strings not copied to Target






Sending Vendor Intro to port 0x0000


Status 0x51


Re-sending Vendor Intro: 


.........


Serial flash found with Status 0x72






Sending Device ID request to port 0x0000


Spi Status: 0x8C


Manufacturer ID: 0xEF


Device ID: 0x11


Flash Name:  Winbond/NEX(W25P20/NX25P20)


Flash Size:  262144 bytes






Sending Spi UnLock request to Port 0x0000


.........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Sending Vendor Outro to port 0x0000


Drive is Slim Lite-On.. 






Key found in KeyDB at record (61 - FW)


Key is: 4FB1CC37F210879BA72BD0EE73FD5978


Key has been tested and verified, thanks C4eva ! 


.............................................

 

[jsinger47]

You just haven't unlocked the SPI yet.

 

[L2000]

All I see in your log is that you are sending unlock command and then outroing the drive after that ,it doesn't show that the spi register has been successfully unlocked ,also if you get a succesful unlock ,theres no need to re intro the drive just click on read to dump ofw,could you possibly post a pic where you've drilled?

 

[gazcoigne]

if the drive is still ejecting normally i would try the drill again slowly.

you have got a false positive beep from JF most likely as your spi would defo be inlocked.

and forget the electric lighter trick, all you need is a q-tip (cotton bud) and some nail polish remover or similar alcohol based fluid.

dip the q tip, remove excess and rub onto hole it will unlock it.

but you havent even unlocked it yet!!

 

[spank127]

Thats the problem, it won't unlock, I just keep getting the dots and no beep, and I don't want to keep drilling

 

[Antalpromille]

Thats the problem, it won't unlock, I just keep getting the dots and no beep, and I don't want to keep drilling

Well dont drill then, get a unlocked pcb if you are to scarred to drill any further.

 

[spank127]

So I should continue drilling slowly?

 

[spank127]

This is the best I could get for now

 

[spank127]

I hope you guys can see, my camera appears to be pretty cheap lol

 

[Antalpromille]

Have you measured to make sure you drill at the right place? Also the hole looks a lot to big imo, wha do you use to drill?

 

[L2000]

I agree hole is too big,are you using a drill bit or exacto knife ,how did you do the pin count,I see no markings or are you using a template?


Tapatalk sent this without my permission ...bad Tapatalk

 

[spank127]

I have the teamplate, lol and it LOOKS to big because I was going to start re drilling but decided NOT to continue, it's just a hair beneath the surface because I stopped, so im sure that, that is not the issue but thanks for the help & suggestions your giving.

 

[SoulReaper223]

get a xacto knife and drill slowly with a little pressure.

 

[L2000]

I personally would continue with a 0.08 drill bit (to each his own) and yes drill very slowly ,i'll be keeping fingers crossed for you .the template is usually spot on ,but you have to make sure the drill bit is correctly centered ie.not moving from side to side with every rotation , that could be the reason why your hole is to big. ( that last sentence just doesn't seem right on so many levels) :redface: