LITEON 74850 Liteon flashed to LT+ 3.0, games not working

A

alan_poh

Junior Member
Apr 6, 2010
22
0
Hello,

so my Liteon 74850 had previosly LT+ 1.91...i didnt flash to stock, but with that firmware did the dashboard update to 14699....
after that dumped the firmware (and it showed still 1.91), flashed to LT+ 3.0...

now not a single game is working....xgd3, xgd2, or none of them....no game is working....wehn i put the game inside the drive, it spins and then nothing....

please, just dont give me ideas of a laser burned or something like that cause this isnt the cause....i removed all the ribbons from the drive when flashing...also, the drive isnt burned as it is recognized normally by the pc and it is ejecting normally....

everything is fine...except it wont read any game....

what should i do? did i f**ked up since i didnt flashed to stock before i did the update do 14699 ? :facepalm:

Thank you!
 
G

GuitarJimbo

Full Member
May 19, 2011
73
0
For a start you don't dump the firmware of the Lite-On drives, you obtain the DVD Key via probing with the xecuter probe III or similar. The dvd key stays the same no matter what however I believe the update from microsoft to the firmware moves the dvd key to a different place in the file.

What does the icon say where it should say play game? Is it just play dvd?

Did you inject your verified dvd key into the LT+ 3.0 firmware you flashed to the drive?

Which version of jungleflasher did you use?

The update usually fails if you have anything other than stock firmware when updating from a dash previous to 13141. Did you update from an update after this?

You should always, Always, ALWAYS flash to stock when accepting any update from xbox live.

Did you put all the ribbons back carefully? No damaged ribbons?
 
A

alan_poh

Junior Member
Apr 6, 2010
22
0
GuitarJimbo said:
For a start you don't dump the firmware of the Lite-On drives, you obtain the DVD Key via probing with the xecuter probe III or similar. The dvd key stays the same no matter what however I believe the update from microsoft to the firmware moves the dvd key to a different place in the file.

What does the icon say where it should say play game? Is it just play dvd?

Did you inject your verified dvd key into the LT+ 3.0 firmware you flashed to the drive?

Which version of jungleflasher did you use?

The update usually fails if you have anything other than stock firmware when updating from a dash previous to 13141. Did you update from an update after this?

You should always, Always, ALWAYS flash to stock when accepting any update from xbox live.

Did you put all the ribbons back carefully? No damaged ribbons?
Click to expand...
i did the MRA Hack...with CK3 PRobe and X360 USB Pro...

i did over 300-400 consoles in my "career"...so you dont need to ask me if i did inject the key into the LT+ 3.0 firmware before flashing :D

version of jungleflasher i used is the last one, 1.91. beta (300)...

i did the update, as always, from a usb stick having the last update on it.....the ribbons are not damaged, and they are in place...

the console didnt read original retail games either...

however, after i did the flashing to LT+ 3.0 for a second time, and again i had the same problem i was pissed and flashed it with LT+ 2.0...now everything works fine, original retail games, and also the backups....what the problem is? dont know really...

i did 2 other consoles (phat) maybe 1 hour after this one....same approach, i did everything the same as for this one....this 2 consoles now have LT+ 3.0 and they are reading games normally, everything is fine....but with this one i had to reflash to LT+ 2.0 and only now everything is fine....

dont know really what the problem is...
 
You must log in or register to reply here.