the read me file said to hold the 'A' button on start up to load ftp, but it doesnt, also i typed the xbox ip address, user name and password into flash fxp but it diddnt give me a box for the subnet mask
Loading FTP mode
- Thread starter thewag
- Start date
- Status
Martin C
VIP Member
i swear i read it in a read me file, if i diddnt do you know how to acces ftp (my xbox is still using the original dashboard)
You probably did, but thats in an older bios.
To get FTP access the universal way is to create a simple Evox Boot CD.
FTP could also be built into you chip [really depends on your chip though] you will have to check it's documentation.
To get FTP access the universal way is to create a simple Evox Boot CD.
FTP could also be built into you chip [really depends on your chip though] you will have to check it's documentation.
im using the x2 5032 bios thing, the normal start up still runs only with the xadapter logo thing, in the readme it said hold a at start up for ftp server, but it doesnt work
Martin C
VIP Member
It was in a previous X2 BIOS version - if you want FTP access then boot a dashboard CD.
Download mine: http://www.xbox-guru.pwp.blueyonder.co.uk/files/evoxbootcd.rar
extract the ISO and burn to a CD/DVD.
You'll get the basic Evox dashboard and the FTP server will be running.
Martin
Download mine: http://www.xbox-guru.pwp.blueyonder.co.uk/files/evoxbootcd.rar
extract the ISO and burn to a CD/DVD.
You'll get the basic Evox dashboard and the FTP server will be running.
Martin
i got the xecuter 2.6 chip and it ignores all disks i put in, i have tried an evox disk but it wouldnt accept it, it wouldnt accept the disk i used to bios it in the first place
Martin C
VIP Member
i have tried the evo iso file disk thing you gave me earlier but it rejects this also, it isnt my writing software because the first disk i put the 5032 bios on, worked
Martin C
VIP Member
How are you writing it to DVD-R? Are you burning it as an image?
What media are you using?
Martin
What media are you using?
Martin
i havent got a dvd writer and the bios i put on first worked on a cd, but it wont boot from any cd's since i put it on, do i have to load up a special mode for this to work
what are you trying to flash?
if your trying to flash 5032 bios then use this
www.teamxecuter.com/flashbios
if your trying to flash 5032 bios then use this
www.teamxecuter.com/flashbios
i just want to tranfer files to 5032 bios but dont know how, i cant use the bios mode suggested at the adress u gave be coz i dont have an x3, i have an x 2.6 so i cant set the switches to off off on on on because i only have 3 switches
thewag:
Dont take this the wrong way but...
Go away and READ some Xbox BASICS tutorials, both here and at xbox-scene.com
What your asking is not X2CL releated, and to be honest if you didnt know what you needed to do BEFORE your modded your xbox, you should never have modded it in the first place.
We are here to help with major problems, but we are NOT going to take you through everything step by step, the info you need is readily available.
Once you have managed to realise that you only every FLASH the Bios to your chip, and then everything need's FTP'ing to your HDD. you will have a lot better understanding of what you need to do.
Dont take this the wrong way but...
Go away and READ some Xbox BASICS tutorials, both here and at xbox-scene.com
What your asking is not X2CL releated, and to be honest if you didnt know what you needed to do BEFORE your modded your xbox, you should never have modded it in the first place.
We are here to help with major problems, but we are NOT going to take you through everything step by step, the info you need is readily available.
Once you have managed to realise that you only every FLASH the Bios to your chip, and then everything need's FTP'ing to your HDD. you will have a lot better understanding of what you need to do.
i am unable to find a tutorial of any help, i want to tranfer files to a x2.6 chip running the 5032 bios, i have tried ftp connections from the pc using the ip i specified on the xbox, the ip in the read me file, the username/pass (xbox xbox and x3 x3). i think the problem is that i need o put the xbox in a special mode for ftp tranfer as it is running the normal xbox dashboard, to do this it says to set the 5 switches to some order, but i only have 3 switches?. if you can answer this problem or give me a link to a tutorial it would help graitly but otherwise stop pointing out my stupidity. i have made an evox dashboard boot disk but the xbox rejects it, it also rejects the disk i tranferd the bios to the xbox on.
Martin C
VIP Member
If you've already flashed 5032 and booting from it, then leave the switches alone.
Get a CD-RW and burn that ISO image I linked for you. Open Nero and select Recorder / Burn Image. Burn the ISO and try it. It may take a few attempts but it should load.
Martin
Get a CD-RW and burn that ISO image I linked for you. Open Nero and select Recorder / Burn Image. Burn the ISO and try it. It may take a few attempts but it should load.
Martin
How do you know what type of dye the dvd uses? And is there a perfect way for burning a dvd r that will always work?
I have a tutorial for burning games onto a dvd that worked for me once but not ever again after that...
http://home.comcast.net/~dsdahl89/files/XboxDVDBurning/index.html
Does that small/quick tut look like it'd work with the correct type of dvd if I was burning from an iso image?
Thanx
I have a tutorial for burning games onto a dvd that worked for me once but not ever again after that...
http://home.comcast.net/~dsdahl89/files/XboxDVDBurning/index.html
Does that small/quick tut look like it'd work with the correct type of dvd if I was burning from an iso image?
Thanx
Martin C
VIP Member
Now I'm really getting the impression you haven't a clue what an ISO file is.
I've already explained how to do it in my previous post:
"Open Nero and select Recorder / Burn Image."
You burn ISO files in exactly the same way, regardless of what they're for.
No excuse for this - search 'burn ISO' on Google....
Martin
I've already explained how to do it in my previous post:
"Open Nero and select Recorder / Burn Image."
You burn ISO files in exactly the same way, regardless of what they're for.
No excuse for this - search 'burn ISO' on Google....
Martin
the xbox wont recognise it, it just freezes for a while, then says it doesnt recognise it
the pc wont recognise it either
the pc wont recognise it either
- Status