After all the scares about XBlive... I've removed all non-MS files off my C: and E: Drives... This unfortunatly means I can nolonger have a custom logo... damn... Would it be poosible to have the X3 look on F:.. Or atleast the option to look on F:.
Logo Booting
- Thread starter MeWhOeLsE
- Start date
Shibz
VIP Member
I second and third this idea. I really don't want to get banned, yet I would like to be able to use a custom logo.
dalime
Noob Account
93450C not reading! Help
I keep getting this error message when I try to read my firmware. I am using 20ohms
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0xA400
Serial flash found with Status 0x72
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Lite-On Dump file saved to C:\my document\JungleFlasher v0.1.69 Beta (75)\JungleFlasher v0.1.69 Beta (75)\Lite-OFW.bin
Loading firmware from buffer
Parse Failed !
I kept my dvd drive off. hit intro, then turn dvd drive on with ground. Then once I get the 0x72 I press read and it asks me to save and then it gives me this error after I save the file. I opened the file and it says corrupted with no Key.
I tried on 1.67B, 1.69B and dosflash 1.8 and they all are not reading my firmware. Please advise on what I can do to fix this. I have tried this a bunch of times.
Is this my motherboard? Using Nforce
could this be my resistor? using 20ohms
I keep getting this error message when I try to read my firmware. I am using 20ohms
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0xA400
Serial flash found with Status 0x72
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Lite-On Dump file saved to C:\my document\JungleFlasher v0.1.69 Beta (75)\JungleFlasher v0.1.69 Beta (75)\Lite-OFW.bin
Loading firmware from buffer
Parse Failed !
I kept my dvd drive off. hit intro, then turn dvd drive on with ground. Then once I get the 0x72 I press read and it asks me to save and then it gives me this error after I save the file. I opened the file and it says corrupted with no Key.
I tried on 1.67B, 1.69B and dosflash 1.8 and they all are not reading my firmware. Please advise on what I can do to fix this. I have tried this a bunch of times.
Is this my motherboard? Using Nforce
could this be my resistor? using 20ohms
Re: 93450C not reading! Help
I'm having similar issues. However when I turn the drive on with the switch to 3.3v, the power led on the 360 flashes. JF only detects the drive when I turn the drive on with the switch set to GND.
I'm worried that I have bricked the drive.
Any suggestions on how to fix this issue would greatly be appreciated.
Lode
I'm having similar issues. However when I turn the drive on with the switch to 3.3v, the power led on the 360 flashes. JF only detects the drive when I turn the drive on with the switch set to GND.
I'm worried that I have bricked the drive.
Any suggestions on how to fix this issue would greatly be appreciated.
Lode
zach_morris
Senior Member
- Dec 8, 2003
- 103
- 0
Re: 93450C not reading! Help
Thanks for the info. I went back over my solder joins and reflowed one of the joins and now it no longer flashing. Now my pc is freezing when I try to intro the drive which I think is being caused by my SATA chipset. My onboard is SiS which worked fine on my Hitachi drive however the Liteon drive seems to disagree with it.
Thanks for the info. I went back over my solder joins and reflowed one of the joins and now it no longer flashing. Now my pc is freezing when I try to intro the drive which I think is being caused by my SATA chipset. My onboard is SiS which worked fine on my Hitachi drive however the Liteon drive seems to disagree with it.
Re: 93450C not reading! Help
I have the same problem after i mine with ixtreme 1.6, now now the JF can't read and spoof the key although!! Only the new drive can be flashed with LT and after making it once i can make it again!
I am using DOS Flash for the key reading.
Please HELP!
I have the same problem after i mine with ixtreme 1.6, now now the JF can't read and spoof the key although!! Only the new drive can be flashed with LT and after making it once i can make it again!
I am using DOS Flash for the key reading.
Please HELP!
Re: 93450C not reading! Help
Hey guys finally dumped the firmware. Took the 360 over to the old man's place and used his pc. Did it first go. Now I just have to spoof the IX firmware with the keys and then write to the drive? I don't have to erase??
Thanks
Lode
Hey guys finally dumped the firmware. Took the 360 over to the old man's place and used his pc. Did it first go. Now I just have to spoof the IX firmware with the keys and then write to the drive? I don't have to erase??
Thanks
Lode
Re: 93450C not reading! Help
Hi there,
I recently tried to dump the key from my lite on 93450c.
I checked all the cuts with a multimeter and all was good.
I tried dumping in dosflash, but no luck.
I then decided to not flash my drive and fixed the traces again.
After installing it in my xbox, i get 3 red lights, error code 0021. and the dvd drive wil not open when pressing the eject button.
Please help me, what do i do know. is the drive permanently dead ?
can i still retrieve my drive key?
Hi there,
I recently tried to dump the key from my lite on 93450c.
I checked all the cuts with a multimeter and all was good.
I tried dumping in dosflash, but no luck.
I then decided to not flash my drive and fixed the traces again.
After installing it in my xbox, i get 3 red lights, error code 0021. and the dvd drive wil not open when pressing the eject button.
Please help me, what do i do know. is the drive permanently dead ?
can i still retrieve my drive key?
slipperysnowman
Console Master
- Nov 16, 2003
- 1,332
- 0
Re: 93450C not reading! Help
Check your soldering , This can happen when you bridge traces with solder . This has happened to me and after fixing bridge the drive worked as normal .
Try using a magnifying glass to have a good look as its not always easy to see with naked eye .
Check your soldering , This can happen when you bridge traces with solder . This has happened to me and after fixing bridge the drive worked as normal .
Try using a magnifying glass to have a good look as its not always easy to see with naked eye .
Re: 93450C not reading! Help
Hi Kakaboi, thnx for the reply. i did not solder the points, i used a conductive pen, to rebuild both traces, a(pad 101) and b. what are the odds that i bricked my drive? i will try to solder the points tonight.
So after repairing the solder, it worked perfectly for you? did you extract the key, cause i could not extract the key.
Hi Kakaboi, thnx for the reply. i did not solder the points, i used a conductive pen, to rebuild both traces, a(pad 101) and b. what are the odds that i bricked my drive? i will try to solder the points tonight.
So after repairing the solder, it worked perfectly for you? did you extract the key, cause i could not extract the key.