[USA] Looking for a cr4 or two

Status
Not open for further replies.

gavin_darkglide

VIP Member
Dec 14, 2012
2,303
118
I think right now we are all looking for them. I would order in bulk from xconsoles, but I cant afford to bye 10+ chips to do 2 xboxes. I had to turn down the customers because they are so hard to get right now. From what I can tell, all the Trusted resellers are getting out of the business(CK3.co.uk, Xconsoles, Modsupplier, VGCRepairs.), because of the credit card processors dumping them for selling them. It is f**king retarded. The chip itself isnt illegal, it is the modified software, so running xell, or linux shouldnt be a problem. And they all say it is for repair. It is annoying. I am happy I modded my stuff when I did.
 

jligg

VIP Member
Mar 16, 2011
1,062
88
Cincinnati Ohio
Hahaha I hope your not serious? Mr mathews I was doing consoles when you were still on ya moms tit. Your the one that has no clue what your doing. All you do is cause damage and offer the worst advice ive ever seen. If this was my forum you would have been gone a long time ago. Actually im surprised tx allows an idot like you to even offer support on there products
 

john mathews

VIP Member
Jan 3, 2014
2,551
88
peoria illinois
Hahaha I hope your not serious? Mr mathews I was doing consoles when you were still on ya moms tit. Your the one that has no clue what your doing. All you do is cause damage and offer the worst advice ive ever seen. If this was my forum you would have been gone a long time ago. Actually im surprised tx allows an idot like you to even offer support on there products
I'm not attacking you personally the statement u said about cr4 are worse in phats is a lie/ do u think tx spent this much time n work on it for nothing/ It bothers me when I see people like u make stupid comments like this and further more I never messed up any of my customers Xboxes I don't know where any of u getting your info u better check my ad on here u right as long as u been here u should no beter to make a comment like that about any of tx chips (cr4 is the best chip ever for xbox ):cool2:
 
Last edited:

jligg

VIP Member
Mar 16, 2011
1,062
88
Cincinnati Ohio
There is a known issues with the chip and certain consoles. If youve done enough you would know that. I know testers of the fukin chip that knows there is an issue, as well as plennty other installers way above your level. Mainly rjtag+
 

john mathews

VIP Member
Jan 3, 2014
2,551
88
peoria illinois
There is a known issues with the chip and certain consoles. If youve done enough you would know that. I know testers of the fukin chip that knows there is an issue, as well as plennty other installers way above your level. Mainly rjtag+
buddy ive done a zephyr do u hear me!!!!!!! its the installers/ now back to the orginal ? I got 2 for 35.00 a piece if u want brand new/ this 3rd shift at caterpillar killing me cant wait to go back to 1st:tongue:
 
Last edited:

XDK

VIP Member
I'm not attacking you personally the statement u said about cr4 are worse in phats is a lie/ do u think tx spent this much time n work on it for nothing/ It bothers me when I see people like u make stupid comments like this and further more I never messed up any of my customers Xboxes I don't know where any of u getting your info u better check my ad on here u right as long as u been here u should no beter to make a comment like that about any of tx chips (cr4 is the best chip ever for xbox ):cool2:
I will be civil about this for moment.. if u have installed enough of them u will notice some jaspers and falcons have issues with a cr4 it's not the installer in fact tydye81 released a possible fix for jasper and falcons if u don't believe jligg thinking it's his fault then u are also calling other installers morons case in point nofeloniesyet, oggy, myself and others who have experienced this first hand.
 

john mathews

VIP Member
Jan 3, 2014
2,551
88
peoria illinois
I will be civil about this for moment.. if u have installed enough of them u will notice some jaspers and falcons have issues with a cr4 it's not the installer in fact tydye81 released a possible fix for jasper and falcons if u don't believe jligg thinking it's his fault then u are also calling other installers morons case in point nofeloniesyet, oggy, myself and others who have experienced this first hand.
im not calling anyone anything I done them all never had any issue other than zephyr because of gpu wasn't very good shape which im gonna have nofel reball or replace it when hes done with my ps3:tongue:
 

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
im not calling anyone anything
Yes you are. You in essence just told jligg he doesn't know what he's doing when it's you who continuously spouts off nonsense. You're continual ass kissing is so annoying. When you aren't giving out sh*t advice you seem to be cupping balls.
 
  • Like
Reactions: jligg

john mathews

VIP Member
Jan 3, 2014
2,551
88
peoria illinois
Yes you are. You in essence just told jligg he doesn't know what he's doing when it's you who continuously spouts off nonsense. You're continual ass kissing is so annoying. When you aren't giving out sh*t advice you seem to be cupping balls.
U sir shouldn't even be posting where are your installs havent seen anything but u running your mouth stay in your lane
 
Last edited:

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
U sir shouldn't even be posting where are your installs have seen anything but u running your mouth stay in your lane
Why would I post pics of my installs smart ass? I dont have a problem every other day like you.
 

john mathews

VIP Member
Jan 3, 2014
2,551
88
peoria illinois
Show me post here that I need help with a cr4 install/ instead of some of u not all of u saying u know what john or whoever tried to help someone one here that's not correct this is what u should of said that way it helps everyone one here instead u idot ,dumbass etc u get the idea!/ sorry jigg I got those cr4 chips if u need pm me:cool2:
 
Last edited:

BrockThunderjam

VIP Member
Jun 25, 2013
1,503
88
Show me post here that I need help with a cr4 install/ instead of some of u not all of u saying u know what john or whoever tried to help someone one here that's not correct this is what u should of said that way it helps everyone one here instead u idot ,dumbass etc u get the idea!
I dont speak idiot, so i dont know what you just said, but here's a CR4 thread since you asked.

http://team-xecuter.com/forums/showthread.php?147941-zephyr-cr4

I see Oggy is in here, probably because we've sh*t on this thread. Sorry Oggy. I'm done.
 

john mathews

VIP Member
Jan 3, 2014
2,551
88
peoria illinois
guess what that's rater I had it glitching but wanted better results which I got on my own!!/ so back to my statement don't post bs about my skills when I never had a customer leave neg feedback or say he couldn't get in contact with me/ or im on here just not responding to him or take a month to do a easy install/ that's the one going to nofel for reball for gpu :cool2:
 
Last edited:

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
everyone needs to cut the sh*t,like now.its getting old. yes the cr4 does have issues on certain phats.thats why tydye made new smcs,in hopes of correcting the issue.if you havent done hundreds of consoles with cr4 by now,chances are you havent seen it first hand.it is there though i promise you.i think jligg worded his sentence wrong,it should have read that its hit or miss on phats,it either works great or not at all,and he just didnt wanna go with one on a phat knowing that.
 
Last edited:
Status
Not open for further replies.