R-JTAG looking for service, Fitzgerald Georgia

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
I'll send the extra jtag alt v2 also

- - - Updated - - -

Alright when I get the console back what is the first thing I need to do with the programming or if you want to do it
i will be completley finishing the install,you wont need to do anything but load ur hdd with sh*t and play :)

- - - Updated - - -

Chances are he will do the programming. That's the easy part.

Btw I see in the photo you broke the trace to the stay-clk.
that's your problem right there.
I'm sure he spotted that already as well.
yup.
 

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
The other demon o have I tried installing it on the other console but didn't work out so I took it off its still good
assuming you didnt rip a ton of pads and traces up with it,or power it wrong,then yes it should be fine.and cr4 is the best/fastest glitch chip you can buy.
 

johnnycalhoun25

Full Member
Mar 21, 2015
65
0
Fitzgerald, Georgia
I know I had to buy a particular hard drive for the other 360 I sold I had to hack it and use ms Dos to install 500go security security sector on it to use a 500g hard drive but I don't think you have to do that now since they came out with a 500gb blue xbox 360 if I'm correct
 

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
If your using a non Xbox hard drive it would still need to be hacked to work with the console. Or you could go buy one at Walmart for $100.
you can use any hdd for the rgh side up to 2tb.you would only need to do the security flashing to a non ms official hdd for use on retail side,just to clarify.
 
  • Like
Reactions: johnnycalhoun25

johnnycalhoun25

Full Member
Mar 21, 2015
65
0
Fitzgerald, Georgia
oh yea for some reason it's wanting to red ring because i had took off one of the heat sinks to solder and then i applied some thermalTake thermal paste then i plugged it up and it 3 red ring and after that is when the grey wire got pulled off. any reason for it to do that