ANSWERED Lost a wire to my CoolRunner package?

F

FatalityxF

VIP Member
Aug 8, 2011
156
0
Just opened up my CoolRunner Rev. B and cannot for the life of me find my brown I2C_SDA wire. Looked everywhere, starting to think it may not have made it into the packaging in the first place.

I'm planning to use a wire from the phat cable bag, but need to know which would be best and what length I should cut it at to emulate the lost wire. Any insight?
 
L

LoneWolf913

FatalityxF said:
Just opened up my CoolRunner Rev. B and cannot for the life of me find my brown I2C_SDA wire. Looked everywhere, starting to think it may not have made it into the packaging in the first place.

I'm planning to use a wire from the phat cable bag, but need to know which would be best and what length I should cut it at to emulate the lost wire. Any insight?
Click to expand...
The shorter the better, but give yourself a little bit of slack for stripping the ends and installing it through-hole, plus you don't want it pulling on the solder joints.
 
F

FatalityxF

VIP Member
Aug 8, 2011
156
0
LoneWolf913 said:
The shorter the better, but give yourself a little bit of slack for stripping the ends and installing it through-hole, plus you don't want it pulling on the solder joints.
Click to expand...
Ended up using some of the remaining 42cm of the CPU_RST wire as I plan on using the QSB option. Thanks!
 
You must log in or register to reply here.