LITEON 74850 Lost dvd key on my Lt+ 1.1 drive

[hanst87]

Hi.
I have a Liteon 74850c drive that i have upgraded to Lt+1.1

I upgraded the xbox360 and now need to flash it to Lt+2.0

The dummy.bin and key.bin file from my computer is gone, because the computer with the files got stolen -_-

I have tried to get the key the same way as when the drive was stock with the Blaster CK3 kit, but it wont give me the key =\

Is there a way to get the key? If so, how?

Many thanks to all replays

 

[diaboliq20]

you need a probe 3 now, and need to probe mpx01

 

[knowlzy10]

also if your still on lt 1.1 you will need to update to latest dash, as there is a dash update that reflashes your drives fw to 0251c,

then once you have the probe 3 just follow that tutorial off this site

 

[hanst87]

I have tried that, but failed =\

I have been doing some reading, and i can see some people saying i have to do the MRA hack now, is there no way around? If not, do u know of a good guide to guide me throug the MRA hacking?

---------- Post added at 14:01 ---------- Previous post was at 14:00 ----------

got the lates dash.. same problem

 

[diaboliq20]

you don't need to MRA it - just get a probe 3 or convert your old one with a switch on 3.3v line and you're good to go...simple

 

[knowlzy10]

I have tried that, but failed =\

I have been doing some reading, and i can see some people saying i have to do the MRA hack now, is there no way around? If not, do u know of a good guide to guide me throug the MRA hacking?

---------- Post added at 14:01 ---------- Previous post was at 14:00 ----------

got the lates dash.. same problem

easiest solution is to purchase the probe 3 and probe mpx01 like diaboliq20 said m8,

takes a matter of 10 mins tops from opening to running backups

 

[hanst87]

i think i have the probe 3.. isen`t that the one in the blaster ck3 kit? http://team-xecuter.com/install-blasterck3/

 

[diaboliq20]

nope - probe 3 has a button on it

---------- Post added at 13:08 ---------- Previous post was at 13:07 ----------

like this

 

[hanst87]

ok i will purchase the probe 3 then, thanks alot for the quick respons

 

[knowlzy10]

you need one of these http://www.ck3.co.uk/xecuter_probe-3_pmt-conversion-cable.html

or one of these http://www.ck3.co.uk/xecuter-ck3_probe-3.html

then your good to go m8

 

[hanst87]

Thanks m8!

 

[ihaveacamaro]

umm hold on don't buy the probe 3 yet...

Can anyone please tell me I'm wrong first. http://www.xconsoles.com/xecuter-blaster-ck3.html

Under features list it says

Includes Mini Probe (No Solder Liteon 74850C DVD Key Extraction)

Isn't that pretty much the probe 3... minus the fact there is no button

 

[diaboliq20]

that's why the conversion cable can make it a probe 3.........the 3.3v line needs to be switched....you can't just use a mini probe any more

 

[ihaveacamaro]

that's why the conversion cable can make it a probe 3.........the 3.3v line needs to be switched....you can't just use a mini probe any more

oh makes sense. Well OP get the probe 3 for sure then, you won't be dissapointed, it's a solid piece of equipment