Lost nand key but have original nand dump

[dil_king]

Ok so I have an xbox 360slim trinity and when i Rgh it i saved the orignal nand and key.


so then I flashed the xbox with a nand from different xbox slim so that I dont get my orignal nand kv banned from xbox live if it ever connects to xbox live.


but now I have lost the key to the nand to the original xbox and when I flash the orignal nand xbox has red light on the console the nand image has no bad blocks.

do i have to remove power to the cool runner and then try booting ?

then create ecc then write ecc to get the original nand key?

 

[Duhasst0]

I can see what you were trying to accomplish but I don't think it works like that. The kv from one console to the other aren't swappable because the cpu key is stored on the cpu itself and won't boot another nand because of this. So what you should do is flash your orginal nand back and recover cpukey again and just use the dash launch plugin to not connect to live.

 

[dil_king]

ye but Rgh your console you can do this. but when I flash the original nand the xbox powers on red light. do i have to remove the coolrunner power for it to boot and how would I get the key to the orignal nand ?

 

[Gears123]

put coolrunner to prg and it will boot, original nand hopefully

 

[BL4K3Y]

Do you still have the console's original NAND dump?

If so, write it back to the console and do as Gears123 suggested - set the CR to PRG.

 

[dil_king]

Yes I have the original dump and I will set it t prg and see and will post back with update

 

[Duhasst0]

Any luck with your console.

 

[dil_king]

ok so I tried it but xbox gets red light

 

[dil_king]

now I created an ecc and then wrote it i can hear it glitching but nothing happens cool runner is on though

 

[BL4K3Y]

What have you done so far?

Did you set your CR to PRG and write your stock NAND dump back to the console?

 

[dil_king]

Here is what I Did


Set cool runner to prg
Flash the original NAND
Turn on Xbox
Xbox has red center light
Turn off xbox
Create ecc
Write ecc
Set cool runner to nor
Turn on Xbox keeps trying to glitch let it for 10 min
Flash the hacked NAND (meaning different kv info from original)
Xbox works fine glitching and running FSD


Now from my understanding red light means incorrect NAND(not original ) I think that because I lost all of my data on hard drive sadly and I think the one I emailed my self is the original but it also cannot be. But I also remember all I did was take the original NAND and inject the kv info from different NAND into it. So the CPU key I have I think is the one for the Xbox. But is there anyway to recover CPU key from kv info so that I can open the NAND that I think is the original and try to put in CPU key into that And see info on that NAND

 

[hotbird_05]

Pictures could help

 

[dil_king]

Ok I have everything figured out just need to know if NAND can be rebuilt from kv info?