Lost on setup...

[phiziKz]

I have an X3 and i was wondering during setup do I use the pin header or the wire adapter on the v1.6 xbox.. cus im lost.

 

[HooDoo]

You can use either, but pin header is easier. Dont forget you have to rebuild the LPC too

 

[phiziKz]

I'm totally lost if I could talk to someone on AIM It'd be much easier.. IM me - xVelocity2k2.

 

[phiziKz]

Anyone?? AIM??

 

[phiziKz]

Comeon I know there's tons of people looking at this that can help me, please guys...IM MEEEE

 

[FREDANTHONY]

Bro, they give you 2 options:
1) wire install, you solder wires to lpc points
2) pin header, easier, place the pin header into lpc and solder from buttom.

Have you read the instructions..and yes on the 1.6 you have to the the rebuild.

Follow this pin header install guide:
http://www.teamxecuter.com/x3/tutorials/x3pin16.htm

The only piece you should have left over is #10.

 

[phiziKz]

I still need to talk to someone on AIM... I'm struggling through this.

 

[FREDANTHONY]

You can reach me on MSN messenger: [email protected]. Dont know if ya can from aol..

Courtousey of bald bouncer, hope you don't mind..
http://www.baldbouncer.co.uk/catalog/images/lpcrebuild2.jpg

 

[FREDANTHONY]

I will be home in about 20 mins, if you can wait I will download aol messenger and help out..

 

[AJerman]

I'd be willing to help you out if you need it, MSN or AIM. But you better make it quick becuase I will be offline all day tomorrow and almost all of the next day (making the trip from Raleigh, NC back to Norman, OK to go back to school. I'll be around tonight, either at my computer or playing a little xbox with my little bro before I have to leave and take it with me.

 

[punch]

there is a problem that I have noticed the tutorals dont show where the LPC rebuild goes it is hard to tell it goes on the bottom of the XBOX motherboard I had this problem and couldnt find it on the tutorals so I guesed and I guess I was rite if not someone will surley correct me

 

[SchOX]

How can you strugle to see that this is on the bottom side of the motherboard?

 

[nutsak]

I have an X3 and i was wondering during setup do I use the pin header or the wire adapter on the v1.6 xbox.. cus im lost.

didn't read the tutorials did we?
he'll be the next one with a quote like the bottom of my sig

 

[mitpat]

I thought they were dieing out but then another NOOB pops up they're like spam they just don't stop