BENQ Lt+ 2.0 and Jf 1.88/1.87 problem

[TheDp153]

I have gotten my self kinda stuck in a bad situation.

WIndows 7
Nforce Sata
Benq
Jf 1.88 and 1.87

Being the noob i am i tried using the jf 1.87 and lt+ 2.0 and to my surprise, the xbox would get the "play dvd" :facepalm:.
I tried using jf 1.88 to erase the flash but everytime i want to put it into vendor mode, my computer completely freezes. Often i will also get the error "Invalid Status"

The only experience i had with lt was using 1.91 w/ jf 1.87. Im having a hard time and not even 1.87 will let me erase/update. Ive searched for a forum similar and I got none that answered my problem. Ive tried many things over the time of 2 days so far.

Thank you in advance for your time, Dp153.

 

[titcave]

use 1.87 to flash stock
use 1.88 to flash lt 2.0
try this

 

[TheDp153]

As i mentioned, im a noob. Am i doing it right? i just tried erasing and got the error Invalid Status. Must I intro/device id to get it into vendor mode?

 

[titcave]

No click on Benq unlock top right

 

[TheDp153]

i just got the error "Benq-Un-Lock command return an Error"

 

[titcave]

Sound bad....

Try with intro device....Press yes....When you see dot .... Power cycle

Try it

 

[TheDp153]

Jf just froze up for a while.. i think i did it wrong tbh, so ill try it again. u can see my huge problem now, right?

 

[titcave]

Sound like it froze because of you chipset

If it doesn't work at all try with a via card

 

[TheDp153]

i have to restart, to redo the driver w/e when u boot and spam f8

---------- Post added at 17:07 ---------- Previous post was at 17:01 ----------

would u like to explain to me on skype? id is thedp153

 

[titcave]

I don't have skype but i think your chipset isn't compatible

Via sata card is like 15$ on ebay

 

[TheDp153]

the annoying thing is i could do all these functions previously. im going to try a different sata port.

 

[theroach]

First off what are you using to flash it?
Secondly when the drive is on in jungleflasher does it recognize it?

 

[lil BLu3 SMuRF]

I have gotten my self
I tried using jf 1.88 to erase the flash but everytime i want to put it into vendor mode, my computer completely freezes.

Solution: x360 USB Pro

 

[pablosns11]

you should pick up an x360 usb pro, i had an nforce4 chipset and it did the same thing, it would freeze. specially with the benq unlock. i use the x360 and never had a problem

 

[TheDp153]

Jungle flasher 1.87/1.88 with Nforce chipset

---------- Post added at 15:53 ---------- Previous post was at 15:52 ----------

i was thinking of the sata pci card. did u have any experience with that?

 

[Nemesis89]

Restart PC and then try to flash. Also, try diferent port

 

[yazzino]

listen some nfore i think the most are incopatible with the benq and sumsung try intel cheapset or x360 USB Pro this is ur only hope