I have a 2 part question. 1) is there a LT+2.0 firmware for Hitachi drives because i cant seem to find it. 2) is there any tutorials on how to use a laptop to flash? I have an HP dv-7, x360usb pro, ck3 lite, and probe 3.
GENERAL LT+2.0 and laptop flashing
- Thread starter megaman3985
- Start date
1. There isnt currently a LT2.0 for hitachies its still being developed.
2. find the drive in current tutorial list and away you go
http://www.team-xecuter.com/forums/forumdisplay.php?f=136
2. find the drive in current tutorial list and away you go
http://www.team-xecuter.com/forums/forumdisplay.php?f=136
x360ccm
BANNED
i was about to post it in 2 stages but my comp frozze on me.
part one keep a eye here >>>>http://c4evaspeaks.com/
part one keep a eye here >>>>http://c4evaspeaks.com/
You could use the usb pro or buy a pcmcia via6421 card if you have a pcmcia port. If you have an express card port, you need an express to pcmica adapter.
Its better to get a USBPRO (Less hassle) but I flash with my pcmcia set everytime and it works just fine.
Hope this helps!
Its better to get a USBPRO (Less hassle) but I flash with my pcmcia set everytime and it works just fine.
Hope this helps!
i have a usb pro but dont know if thats all i need to flash on my computer. and i also just bought a molex adapter for my ck3 lite
Thats all you will need, providing youve set up the software for the uxbpro you should be set to go, agian follow the link i said earlier and follow it to the letter and youll have no problems. If you need to know how to in stall the x360uxbpro, go to their website and all the instructions are there.
ok thankx cuz ive seen alot of forums saying that you could flash on a laptop and alot saying that you cant
The release of the x360usbpro made it really easy for the people with laptops as it uses the usb function rather than the via cards. I used to use my laptop and its really easy.
I used a usb to sata converter (not x360usb pro) back in the day to flash hitachi drives on a laptop.