LITEON DG-16D4S - SLIM LT+2.0 SLIM HELP

[carlnw1975]

Just a quick question guys for updating to the 2.0 on slim, is it just a case of loading your dummy.bin and then the 2.0 CFW and spoofing etc

 

[bioflex]

yep.thats pretty much for it. and i dont think you have to spoof the slim, just use the firwire for the drive you have.

 

[BL4K3Y]

As long as your dashboard is the latest (13599) then what you said in your original post is fine. However, if you aren't on the latest dash then you will need to flash back to stock firmware and then flash LT 2.0.

 

[carlnw1975]

cheers guys thanks for that

 

[carlnw1975]

right, i`ve got a issue guys, when i load the firmware mine is lite on 0272, when i load the 0272.bin(2.0) but in junglflasher it is showing 1.92 instead of 2.0 and then says target is not Lite on.
any ideas

 

[piromaniac]

Apparently for some reason it does that as long as you know you've chose 2.0 you will be fine.

 

[carlnw1975]

so it should be ok to carry on with the lite0on erase when it says target isn`t a lite 0n?

just tried doing the lite on erase and it won`t have it, so i`m at a total loss as to what to do