LT+3.0 on 0225 Slim Lite-on

[rbuckenmeyer]

I’m working on my first slim flash of an 0225 lite-on. I bought an unlocked pcb and everything seems to be correct according to the JF tut, except the outro line “Sending Vendor Outro to port 0×0000″ only shows one time instead of 2 as specifically listed in the tutorial.

Everything else proceeded as described. Can anyone confirm that it locked the drive correctly before I put it back together and power on?

JF log linked here.

Thank you.

 

[reefz3ro]

i cant see ur jf log but as long as it shows key found and verified after outro you should be good to go

 

[rbuckenmeyer]

Alright, it does say key found and verified so I'll give it a go.

Thanks.

 

[xbox360 hacker]

There is nothing in your jf log that states you have locked the drive. once flash is done you need to intro the drive and click on the 0x0 tab.

edit: you should see written in your jf log if drive has been locked

Sending Spi Lock request to Port 0x0000

Spi Status: 0x8C

Sending Vendor Outro to port 0x0000

Drive is Lite-On..