LT+ AP2.5 Patches

W

Warbsky

Full Member
Nov 25, 2010
25
0
Re: LT+ AP2.5 Patches - Download !

@badboy1 - I meant pictures of your settings on your Options and AutoFix tab.

Check to see your settings match these:



@linelow - That abgx log seems ok to me, what AP2.5 patch are you using?

Does it say this in the log when you load the patch:

 
B

badboy1

Full Member
May 26, 2009
54
0
Re: LT+ AP2.5 Patches - Download !

warbsky said:
@badboy1 - i meant pictures of your settings on your options and autofix tab.

Check to see your settings match these:



@linelow - that abgx log seems ok to me, what ap2.5 patch are you using?

Does it say this in the log when you load the patch:

Click to expand...

yep all the same
 
C

cylix

Noob Account
Nov 25, 2010
1
0
Re: LT+ AP2.5 Patches - Download !

I wish everyone would read through the forums, but it is getting difficult with tons of the same posts. However, I have read through the majority of them to attempt to find an answer to my question. Which I don't believe was answered, but I'll be honest in that I did skip a few pages.

Will the 800 firmware release cover the AP25 data? I understand this is a patch that is currently provided, but I'm not sure what the patch is. My hope is that when an LT+ 800 release I can rip my own backups without relying on scene releases with the addition of manual patches. (Something I would like to avoid because I'm just not a trusting person).

Just to re-iterate, will the 800 firmware release of the new LT firmware do away with the need for release patches or is there something else going on.

Also, more data on AP25 and the new firmware changes would be nice. I'm a technical person and I'm mostly curious.
 
J2G

J2G

VIP Member
May 13, 2010
3,737
0
90°N
www.esl-communications.com
Re: LT+ AP2.5 Patches - Download !

Mad_maniac said:
i'm having the same problem playing ap25 games... updated 2 consoles (both liteon 83v1) to lt+ , verified both games (ac3 , nfshp) in abgx 1.0.4 both were fixed and pass tests 100% (using the settings described in this thread).
burned 4 discs (verbatim) of ac3 on 2 different burners, and 2 discs of nfshp but they give dirty disc error in both consoles when installing to hdd (didn't try launching the games yet)... old ssv2 games run and install fine on both consoles. i've been flashing drives since 2006 and i never needed to post on forums before, but now i don't know what to do... any help?
tkx in advance
Click to expand...
there is nothing wrong with the LT+ iv tested it on many consoles now and on live Assassin's Creed Brotherhood - RF - GLOBAL / Need For Speed Hot Pursuit - PAL - LoCAL are working 100%

using abgx360 v1.0.4 release
no need to untick "Check/Fix Video padding its already done
use PPF-O-Matic v3 to patch your ISO with the right patch / eg. Need For Speed Hot Pursuit - PAL - LoCAL (v1.1 Version - Updated)
Patch the ISO / then run it in abgx360 GUI making sure you patched it with the right SS CRC / DMI CRC.
And burn your backup with good D/L Media no cheap crap if you get errors after that its not the flash id be looking more in the line of its your Drive Laser
is on its last Legs...
 
W

Warbsky

Full Member
Nov 25, 2010
25
0
Re: LT+ AP2.5 Patches - Download !

badboy1 said:
yep all the same
Click to expand...
I'm running out of ideas.

Ok, go into the Misc tab on abgx and make sure your SplitVid option is set to "Add it if it doesn't exist or isn't valid"



Also, forget about manually patching it. Just simply run the .iso through abgx 1.0.4 because the auto-patching on it works fine, there is no faults with it.

So make sure "Check/Fix Video padding" is unticked



So just run it though abgx and forget about manually patching it, just let abgx do it's thing and burn it to a disk if you have any left. :)p)
 
Last edited:
M

Mad_maniac

Noob Account
Apr 15, 2004
4
0
Re: LT+ AP2.5 Patches - Download !

Johnny2good said:
there is nothing wrong with the LT+ iv tested it on many consoles now and on live Assassin's Creed Brotherhood - RF - GLOBAL / Need For Speed Hot Pursuit - PAL - LoCAL are working 100%

using abgx360 v1.0.4 release
no need to untick "Check/Fix Video padding its already done
use PPF-O-Matic v3 to patch your ISO with the right patch / eg. Need For Speed Hot Pursuit - PAL - LoCAL (v1.1 Version - Updated)
Patch the ISO / then run it in abgx360 GUI making sure you patched it with the right SS CRC / DMI CRC.
And burn your backup with good D/L Media no cheap crap if you get errors after that its not the flash id be looking more in the line of its your Drive Laser
is on its last Legs...
Click to expand...
i've done all that and i only burn quality verbatim dvd's...my abgx settings are exactly like the ones posted above, i've tried patching the iso first then abgx, and directly in abgx without patching the result is the same. also the second dvd burner i used is almost new i think i only burned 7 or 8 dvd's with it (and never had problems)...
 
N

NotHappy

Full Member
Nov 10, 2010
44
0
Canada
Re: LT+ AP2.5 Patches - Download !

LT+ works fine for all retail discs. Just run them through ABGX with Level 3 and LT+ plays them fine.

EDIT: This include ACB, Black Op's and Fable 3.
 
J2G

J2G

VIP Member
May 13, 2010
3,737
0
90°N
www.esl-communications.com
Re: LT+ AP2.5 Patches - Download !

@ Mad_maniac
Right so who says there is something wrong with the backups you made if you did it all to the book then you are having a problem with your drive on your xbox 360 the Laser might be on its way out bro it happens or its a bad flash don't think its that did you remove the ribbon off the laser when you flashed it with the LT+ ??
 
B

badboy1

Full Member
May 26, 2009
54
0
Re: LT+ AP2.5 Patches - Download !

warbsky said:
i'm running out of ideas.

Ok, go into the misc tab on abgx and make sure your splitvid option is set to "add it if it doesn't exist or isn't valid"



also, forget about manually patching it. Just simply run the .iso through abgx 1.0.4 because the auto-patching on it works fine, there is no faults with it.

So make sure "check/fix video padding" is unticked



so just run it though abgx and forget about manually patching it, just let abgx do it's thing and burn it to a disk if you have any left. :)p)
Click to expand...

already done the only thing i can think of is i updated without lt+ i have a backup of fable is all good just need for speed and acb !
It doesnt even spin up it just says disk un readable
 
M

Mad_maniac

Noob Account
Apr 15, 2004
4
0
Re: LT+ AP2.5 Patches - Download !

Johnny2good said:
@ Mad_maniac
Right so who says there is something wrong with the backups you made if you did it all to the book then you are having a problem with your drive on your xbox 360 the Laser might be on its way out bro it happens or its a bad flash don't think its that did you remove the ribbon off the laser when you flashed it with the LT+ ??
Click to expand...
i don't think the fw or the drive is the problem, cause i've tried some of my old ssv2 backups and they install and boot fine. i also burned dj hero 2 after assassins and it worked fine. the drives are both liteon 83v1 so i didn't need to mess with the internals, just did liteon-erase and used as source the original dummy.bin from the first time the drives were modified.
i apreciatte the help, all you said is excelent advice, i'm just frustated it didn't work for me...
 
C

connormmii

Full Member
Nov 24, 2010
47
0
Springfield Lakes, Australia
Re: LT+ AP2.5 Patches - Download !

Mad_maniac said:
i don't think the fw or the drive is the problem, cause i've tried some of my old ssv2 backups and they install and boot fine. i also burned dj hero 2 after assassins and it worked fine. the drives are both liteon 83v1 so i didn't need to mess with the internals, just did liteon-erase and used as source the original dummy.bin from the first time the drives were modified.
i apreciatte the help, all you said is excelent advice, i'm just frustated it didn't work for me...
Click to expand...
I second the frustration as all my previous backups work. All i can do is wait for my 2nd console to get flashed (its a 93 and i dont feel confident cutting traces) and test it on that.
 
N

NvZ75

Noob Account
Nov 25, 2010
4
0
Re: LT+ AP2.5 Patches - Download !

Hello Xecuter, I have same the problem.

I have à LiteOn LT+, My Config ABGX :

​

And my log ABGX only is here http://www.team-xecuter.com/forums/showpost.php?p=307453&postcount=349

I try :
- PPF patch only + Burning
- PPF patch + ABGX + Burning
- ABGX Only + Burning (try with uncheck and check fix splitvid)
Result is "Disque illisible" "Unreadable Disc" for all

Sorry for my english i'm french..
 
J

john09

Noob Account
Nov 25, 2010
3
0
Re: LT+ AP2.5 Patches - Download !

When I have :

"AP25 replay sector is blank!

Set AutoFix Threshold to Level 1 or higher in order to fix the AP25 replay sector"

and burn disc, I can't play LT+ ?
 
C

connormmii

Full Member
Nov 24, 2010
47
0
Springfield Lakes, Australia
Re: LT+ AP2.5 Patches - Download !

So if i updated my dash then tried to play a backup of ACB without LT+ OFFLINE can this be causing my unreadable disc error now that i do have LT+? I dont care about live just getting these damn backups to work
 
You must log in or register to reply here.