LITEON 83850 v1 lt switch

cha0sriderx

Senior Member
Sep 2, 2011
129
0
ive been trying to mod an xbox 360 elite i tried a few different ways like the LO83 info and the DVDkey 32 with a probe and i had no luck so i tried putting an LT Switch v1.6 up there. did the cuts and solders and the light stays green, it will blink red then go back green after i switch to R/W and power the drive back on.
 

WestCoastConsoles

VIP Member
Dec 29, 2010
1,347
0
Portland, OR
Try phat key extract lt switches are outdated and phat key extract is so much simpler look for a DIY probe 3 or purchase a conversion cable and read up on a probe 3 for your drive. What dash is it on


Also post pics of your install because what you describe sounds like a connection issue
 
Last edited:

cha0sriderx

Senior Member
Sep 2, 2011
129
0
sorry if its a double post. ive been searching all over the net for answers.

i actually tried the phat key originally and it didnt work but i was using a maximus xtractor which might of been why. i have a CK3 Pro, but couldnt use it since i have a Maximus power unit. guess its time to get one.
 

cha0sriderx

Senior Member
Sep 2, 2011
129
0
thanks for the help. i eventually figured out what i did wrong with the LT Switch(didnt set the ohms... smh). but next time ima go with probe 3 which is alot less work;P.