GENERAL LT+ v1.9 problems - READ IN HERE FIRST !
- Thread starter Xecuter
- Start date
dg-16d4s
0225
tx pcb
LT+ 0225 V1.9
13599 dash
play dvd error on some backups
tip test works occasionally
obviously some bugs, i'm sure they will get ironed out. until then, thankful for the new cfw
0225
tx pcb
LT+ 0225 V1.9
13599 dash
play dvd error on some backups
tip test works occasionally
obviously some bugs, i'm sure they will get ironed out. until then, thankful for the new cfw
"dump the lens calibration data and these errors will not occur"
one of the guys i know says this, does this help. if it does thanks go to him, hope this helps.
one of the guys i know says this, does this help. if it does thanks go to him, hope this helps.
Hi,
I have a 0225 with PCB Unlock and no issues of reading backup or originals. All work great !
PS : sorry for my english, I'm French
I have a 0225 with PCB Unlock and no issues of reading backup or originals. All work great !
PS : sorry for my english, I'm French
1. Model number of DVD drive: Label 9504(firm 0225)
2. Original firmware version of DVD drive: 0225
3. Method of hack: sata DOSFlash 1.9 Unlocked PCB. (The unlock PCB come with wire red and black inverted i resolder that cables and all ok)
4. Version of fw flashed: LTPlus-0225-v1.9u
5. Dashboard version: 13599
6. Exact error: Only one time Play DVD with all games
7. Troubleshoot tip test: I shutdown and power on the xbox and no more problems
2. Original firmware version of DVD drive: 0225
3. Method of hack: sata DOSFlash 1.9 Unlocked PCB. (The unlock PCB come with wire red and black inverted i resolder that cables and all ok)
4. Version of fw flashed: LTPlus-0225-v1.9u
5. Dashboard version: 13599
6. Exact error: Only one time Play DVD with all games
7. Troubleshoot tip test: I shutdown and power on the xbox and no more problems
1. Model number of DVD drive - DG16D4S 0225 x 3 and 1 x 9504 but is 0225
2. Original firmware version of DVD drive - 0225 x 4
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - Unlocked PCB x1 russian hack x1 9504 virgin boards flashed as 0225
5. Exact error (Open tray or Play DVD) - None, works perfectly
6. Troubleshoot tip test - working yes/no - Not needed
2. Original firmware version of DVD drive - 0225 x 4
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - Unlocked PCB x1 russian hack x1 9504 virgin boards flashed as 0225
5. Exact error (Open tray or Play DVD) - None, works perfectly
6. Troubleshoot tip test - working yes/no - Not needed
Last edited:
Hi,
my feedback
1. Model number of DVD drive - dg16d4s 0225 factory
2. Original firmware version of DVD drive - 0225
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - Unlocked PCB + JF 1.85 + X360 USB
4. Version of fw flashed - LTPlus-0225-v1.9.bin not 0225u
5. Dashboard version 2.0.13599.0
6. Exact error (Open tray or Play DVD) - none
7. Troubleshoot tip test - working yes/no - it works without any issues
Hope it helps.
Millyformilly
my feedback
1. Model number of DVD drive - dg16d4s 0225 factory
2. Original firmware version of DVD drive - 0225
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - Unlocked PCB + JF 1.85 + X360 USB
4. Version of fw flashed - LTPlus-0225-v1.9.bin not 0225u
5. Dashboard version 2.0.13599.0
6. Exact error (Open tray or Play DVD) - none
7. Troubleshoot tip test - working yes/no - it works without any issues
Hope it helps.
Millyformilly
1. Model number of DVD drive - dg16d4s 9504 factory upgraded to 0225
2. Original firmware version of DVD drive - 0225
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - Unlock PCB
4. Version of fw flashed 0225u.bin
5. Exact error (Open tray or Play DVD) - Play DVD on both RETAIL and BACKUP
6. Troubleshoot tip test - working yes/no - Unplug xbox after it says "play DVD" plug back in, Loads AND plays fine on both RETAIL and BACKUP...
PS: Back to PLAY DVD after 3rd reset. RETAIL AND BACKUP same result...
2. Original firmware version of DVD drive - 0225
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - Unlock PCB
4. Version of fw flashed 0225u.bin
5. Exact error (Open tray or Play DVD) - Play DVD on both RETAIL and BACKUP
6. Troubleshoot tip test - working yes/no - Unplug xbox after it says "play DVD" plug back in, Loads AND plays fine on both RETAIL and BACKUP...
PS: Back to PLAY DVD after 3rd reset. RETAIL AND BACKUP same result...
Last edited:
1. Model number of DVD drive: Liteon 0225 (labeld as 9504)
2. Original firmware version of DVD drive: 0225
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack): Unlocked PCB
4. Version of fw flashed: LTPlus-0225-v1.9u
5. Dashboard version: 13146
6. Exact error (Open tray or Play DVD): PLAY DVD
7. Troubleshoot tip test - working yes/no: flashed again worked 1-4 hours, play dvd again then i flash it again and so on.!
2. Original firmware version of DVD drive: 0225
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack): Unlocked PCB
4. Version of fw flashed: LTPlus-0225-v1.9u
5. Dashboard version: 13146
6. Exact error (Open tray or Play DVD): PLAY DVD
7. Troubleshoot tip test - working yes/no: flashed again worked 1-4 hours, play dvd again then i flash it again and so on.!
1. Model number of DVD drive - dg16d4s 9504 factory upgraded to 0225
2. Original firmware version of DVD drive - 0225
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) -Pro Kit
4. Version of fw flashed 0225u.bin
5. Exact error (Open tray or Play DVD) - Play DVD
6. Troubleshoot tip test - working yes/no - Unplug xbox after it says "play DVD" plug back in, Loads AND plays fine
2. Original firmware version of DVD drive - 0225
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) -Pro Kit
4. Version of fw flashed 0225u.bin
5. Exact error (Open tray or Play DVD) - Play DVD
6. Troubleshoot tip test - working yes/no - Unplug xbox after it says "play DVD" plug back in, Loads AND plays fine
1. Model number of DVD drive - DG16D4S 9504
2. Original firmware version of DVD drive - 9504 / 0272
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - Unlocked PCB
4. Version of fw flashed - LTPlus-0272-v1.9
5. Exact error (Open tray or Play DVD) - No issues
6. Troubleshoot tip test - working yes/no - No issues
7. Dashboard - 2.0.13599
2. Original firmware version of DVD drive - 9504 / 0272
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - Unlocked PCB
4. Version of fw flashed - LTPlus-0272-v1.9
5. Exact error (Open tray or Play DVD) - No issues
6. Troubleshoot tip test - working yes/no - No issues
7. Dashboard - 2.0.13599
. Model number of DVD drive - DG16D4S 9504
2. Original firmware version of DVD drive - 9504 / 0272
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - Unlocked PCB
4. Version of fw flashed - LTPlus-0272-v1.9
5. Exact error (Open tray or Play DVD) - No issues
6. Troubleshoot tip test - working yes/no - No issues
7. Dashboard - 2.0.13599
2. Original firmware version of DVD drive - 9504 / 0272
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - Unlocked PCB
4. Version of fw flashed - LTPlus-0272-v1.9
5. Exact error (Open tray or Play DVD) - No issues
6. Troubleshoot tip test - working yes/no - No issues
7. Dashboard - 2.0.13599
Hi.
first attempt.
1. Model number of DVD drive: 9504(but jf says 0225)
2. Original firmware version of DVD drive: 0225
3. Method of hack: xecutor PCB.
4. Version of fw flashed: LTPlus-0225-v1.9u
5. Dashboard version: 2.012611.0
6. Exact error: Dvd always opens up and stay opened.
7. Troubleshoot tip test - working yes/no. No It always ejects.
now I just tried to put original pcb back and soldered back the wired. The xbox works perfect with original pcb, no tray eject. I have a really old dashboard so I will try to update it tomorrow and try with xecutor dash again later.
second attempt.
Hi again test with new dashboard 2.0.13599 and the same xecutor PCB again. Also tried the hex edit the line 1FF80 to 01 04 01 00 02 01 00 1A 02 01 53 54 04 01 05 01 but no difference the drive keep eject and stays opened up.
first attempt.
1. Model number of DVD drive: 9504(but jf says 0225)
2. Original firmware version of DVD drive: 0225
3. Method of hack: xecutor PCB.
4. Version of fw flashed: LTPlus-0225-v1.9u
5. Dashboard version: 2.012611.0
6. Exact error: Dvd always opens up and stay opened.
7. Troubleshoot tip test - working yes/no. No It always ejects.
now I just tried to put original pcb back and soldered back the wired. The xbox works perfect with original pcb, no tray eject. I have a really old dashboard so I will try to update it tomorrow and try with xecutor dash again later.
second attempt.
Hi again test with new dashboard 2.0.13599 and the same xecutor PCB again. Also tried the hex edit the line 1FF80 to 01 04 01 00 02 01 00 1A 02 01 53 54 04 01 05 01 but no difference the drive keep eject and stays opened up.
Another Slim LiteOn (0225)... no problems after flashing. This time I used the Unlocked PCB instead of the Russian Hack (the chip was MXIC but the customer wanted the Xecuter unlocked PCB for the higher price anyways).
1. Model number of DVD drive DG-16D4S
2. Original firmware version of DVD drive 0225
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) Unlocked PCB
4. Version of fw flashed LT-Plus 1.9
5. Dashboard version 12625
6. Exact error (Open tray or Play DVD) No problems
7. Troubleshoot tip test - working yes/no N/A
1. Model number of DVD drive DG-16D4S
2. Original firmware version of DVD drive 0225
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) Unlocked PCB
4. Version of fw flashed LT-Plus 1.9
5. Dashboard version 12625
6. Exact error (Open tray or Play DVD) No problems
7. Troubleshoot tip test - working yes/no N/A
@bs viper striked
They asked for feedback meaning good or bad
I glad to see some people are having no issues with 0225 because I plan on flashing.
They asked for feedback meaning good or bad
I glad to see some people are having no issues with 0225 because I plan on flashing.
Sorry, I didnt see it at the end, Just trying to help the community, but yes, you were correct, Hope you do not run into the same problem i did, Tired of soldering and re-soldering the original pcb board on my 0225u drive.
1. Model number of DVD drive: 0225
2. Original firmware version of DVD drive: 0225
3. Method of hack: Xecuter Unlocked PCB (Retrieve Key with JungleFlasher 1.8.5)
4. Version of fw flashed: LTPlus-0225-v1.9
5. Dashboard version: 2.0.13146
6. Exact error: No error on Dash 2.0.13146
But after updating to Dash 2.0.13599 (without reflashing to Stock)...
6. Exact error: AC:Brotherhood (original / no Backup) shows "Play DVD" Error.
7. Troubleshoot tip test - working yes/no. Yes. Again - Retrieve the Key from Original-PCB and flash your Unlocked PCB with LTPlus-0225-v1.9
Is it possible that updating to Dash 2.0.13599 changes something in my flashed 0225 drive?
P.S. It is an original game, so I don't have to wait for AP2.5 Patch. (After reflashing my drive, all works fine!)
2. Original firmware version of DVD drive: 0225
3. Method of hack: Xecuter Unlocked PCB (Retrieve Key with JungleFlasher 1.8.5)
4. Version of fw flashed: LTPlus-0225-v1.9
5. Dashboard version: 2.0.13146
6. Exact error: No error on Dash 2.0.13146
But after updating to Dash 2.0.13599 (without reflashing to Stock)...
6. Exact error: AC:Brotherhood (original / no Backup) shows "Play DVD" Error.
7. Troubleshoot tip test - working yes/no. Yes. Again - Retrieve the Key from Original-PCB and flash your Unlocked PCB with LTPlus-0225-v1.9
Is it possible that updating to Dash 2.0.13599 changes something in my flashed 0225 drive?
P.S. It is an original game, so I don't have to wait for AP2.5 Patch. (After reflashing my drive, all works fine!)
1. Model number of DVD drive: 0225
2. Original firmware version of DVD drive: 0225
3. Method of hack: Xecuter Unlocked PCB (Retrieve Key with JungleFlasher 1.8.5 beta 257)
4. Version of fw flashed: LTPlus-0225-v1.9
5. Dashboard version: 2.0.13146 and 2.0.13599.0
6. Exact error: Open tray
7. Troubleshoot tip test - working yes/no. No
Have the problem with both copy and the original DVD's, tried several, like kinectimals, Lego star wars III, all non AP2.5.
Build back to original PCB, originals works fine.
Tried to alter the CFW with 01 04 01 00 02 01 00 1E 02 01 53 54 04 01 05 01
This is the value also in the dummy.bin extracted from my original PCB.
Also updated the dash, see if that makes any difference, Open tray error stays whatever I try.
Let me know where I can upload my CFW if this helps troubleshooting !
*edit* couple of hours later
After trying about almost everything I could find in the topics around this problem, I thought, let's give it a try with another replacement PCB.
I had one extra for another xbox I was planning to upgrade for a friend of mine.
Flashed the new PCB, all problems are gone, everything works fine now !!
One thing, when I used the first board, the DVD player didn't even spin and the green power light kept on flashing. But the "Open Tray" status pushed me obvious in the wrong direction, looks that I simply had a faulty replacement PCB to begin with, do you guys agree ?
2. Original firmware version of DVD drive: 0225
3. Method of hack: Xecuter Unlocked PCB (Retrieve Key with JungleFlasher 1.8.5 beta 257)
4. Version of fw flashed: LTPlus-0225-v1.9
5. Dashboard version: 2.0.13146 and 2.0.13599.0
6. Exact error: Open tray
7. Troubleshoot tip test - working yes/no. No
Have the problem with both copy and the original DVD's, tried several, like kinectimals, Lego star wars III, all non AP2.5.
Build back to original PCB, originals works fine.
Tried to alter the CFW with 01 04 01 00 02 01 00 1E 02 01 53 54 04 01 05 01
This is the value also in the dummy.bin extracted from my original PCB.
Also updated the dash, see if that makes any difference, Open tray error stays whatever I try.
Let me know where I can upload my CFW if this helps troubleshooting !
*edit* couple of hours later
After trying about almost everything I could find in the topics around this problem, I thought, let's give it a try with another replacement PCB.
I had one extra for another xbox I was planning to upgrade for a friend of mine.
Flashed the new PCB, all problems are gone, everything works fine now !!
One thing, when I used the first board, the DVD player didn't even spin and the green power light kept on flashing. But the "Open Tray" status pushed me obvious in the wrong direction, looks that I simply had a faulty replacement PCB to begin with, do you guys agree ?
Last edited:
erd132
BANNED
1. Model number of DVD drive - DG16D4S 9504/0272
2. Original firmware version of DVD drive - 0272
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - spare 9504 drive
4. Version of fw flashed - LTPlus-0272-v1.9
5. Exact error (Open tray or Play DVD) - No issues
6. Troubleshoot tip test - working yes/no - No issues
7. Dashboard - 2.0.13599
2. Original firmware version of DVD drive - 0272
3. Method of hack (Unlocked PCB / Pro Kit / Russian Hack) - spare 9504 drive
4. Version of fw flashed - LTPlus-0272-v1.9
5. Exact error (Open tray or Play DVD) - No issues
6. Troubleshoot tip test - working yes/no - No issues
7. Dashboard - 2.0.13599