GENERAL LTU Junlgeflasher Key Verification failed

[ibrahim11]

Hi i just flashed my drive with ltu and i just looked back at the log and it said Key Verification Failed

Log:





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.94 Beta (320)

Session Started Thu Jan 31 18:18:46 2013



This is a 32 bit process running on 4 x 32 bit CPUs

X360USB PRO detected, Version 0.20



Found 1 I/O Ports.

Found 0 Com Ports.

Found 8 windows drives C: D: E: F: H: I: J: K:

Found 2 CD/DVD drives E: F:



Loading firmware file C:\Users\Ibrahim\Desktop\JungleFlasher v0.1.94 Beta (320)\firmware\LTU-1175.bin

MD5 hash: XXXXXXXXXXXXXXXXXXXXXXXX (i blocked it out)

Genuine LTU v1.0

Drive key @ 0x1EFF0 77777777777777777777777777777777

Firmware Osig: [PLDS DG-16D5S 1175]

Firmware is: LTU v1.0



re-parseing file

Loading firmware from buffer

Drive key @ 0x1EFF0 XXXXXXXXXXXXXXX ( I blocked drive key out)

Firmware Osig: [PLDS DG-16D5S 1175]

Firmware is: LTU v1.0

Key Verified

Grabbing RAM data

...............



re-parseing file

Loading firmware from buffer

Drive key @ 0x1EFF0 XXXXXXXXXXXXXXX

Firmware Osig: [PLDS DG-16D5S 1175]

Firmware is: LTU v1.0



Target f/w saved as: LTU.bin





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.94 Beta (320)

Session Started Thu Jan 31 21:22:21 2013



This is a 32 bit process running on 4 x 32 bit CPUs

X360USB PRO detected, Version 0.20



Found 1 I/O Ports.

Found 0 Com Ports.

Found 8 windows drives C: D: E: F: H: I: J: K:

Found 2 CD/DVD drives E: F:



Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0xEF

Device ID: 0x11

Flash Name: Winbond/NEX(W25P20/NX25P20)

Flash Size: 262144 bytes



Getting Status from port 0x0000

Loading firmware file C:\Users\Ibrahim\Desktop\J-Runner v02 Beta (286) Core Pack\output\LTU.bin

MD5 hash: XXXXXXXXXXXXXXXXXX

Drive key @ 0x1EFF0 XXXXXXXXXXXXXXXXXXXXX

Firmware Osig: [PLDS DG-16D5S 1175]

Firmware is: LTU v1.0



Getting Status from port 0x0000

Loading firmware file C:\Users\Ibrahim\Desktop\JungleFlasher v0.1.94 Beta (320)\firmware\LTU-1175.bin

MD5 hash: XXXXXXXXXXXXXXXXXXXXX

Genuine LTU v1.0

Drive key @ 0x1EFF0 77777777777777777777777777777777

Firmware Osig: [PLDS DG-16D5S 1175]

Firmware is: LTU v1.0



re-parseing file

Loading firmware from buffer

Drive key @ 0x1EFF0 XXXXXXXXXXXXXXXXXXXXX

Firmware Osig: [PLDS DG-16D5S 1175]

Firmware is: LTU v1.0



Stage 1 failed

Key Verification Failed !!

Additional extracts not completed.



Target f/w saved as: ltu1.bin

Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0xEF

Device ID: 0x11

Flash Name: Winbond/NEX(W25P20/NX25P20)

Flash Size: 262144 bytes



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................

Sending Vendor Outro to port 0x0000

Drive is Slim Lite-On..

Sending Vendor Intro to port 0x0000

Status 0x51

 

[Oggy]

That typo is so JungleJim.... parseing

 

[ibrahim11]

is it safe to go on live - also where is my stock fw

 

[Oggy]

On your stock pcb

 

[ibrahim11]

On your stock pcb

oh yeah... i forgot about that :facepalm:

---------- Post added at 14:43 ---------- Previous post was at 14:41 ----------

is everything alright.. by this i mean is the flash successful, will i be safe on live

 

[Martin C]

You will be able to use backups on Xbox Live.

If you're that paranoid, don't do it.

 

[ibrahim11]

Hi, i just put my xbox back together and it stops reading discs about 5 seconds after you put it in and close the tray. this also happens with original games as well. it goes to open tray.

 

[MANUMAN]

Ha ha you did it wrong

 

[ibrahim11]

what do you mean

 

[stefanounick]

are you sure the nand - drive combination is correct?

Sent from my Nexus 7

 

[ibrahim11]

are you sure the nand - drive combination is correct?

Sent from my Nexus 7

Hi, yes I compared nands and no bad blocks were found the CPU and DVD key is correct. The Xbox is only less than a month old so it can't be anything wrong with the drive physically

 

[ibrahim11]

Anyone. .....

 

[stefanounick]

seriously? you had an intro'd drive and you tried to create new fw again?

no wonder why it said key verification failed

---------- Post added at 00:51 ---------- Previous post was at 00:49 ----------

Sata Chipset: Lizard

that is so Oggy

 

[ibrahim11]

Is this why it can't read discs - shall I delete all the fw that jf made and remake and reflash over current fw on pcb

 

[stefanounick]

ya, do the process from the JF part again

 

[ibrahim11]

ya, do the process from the JF part again

OK I'll try that tommorow . I'll update this thread after I have tried it. Thanks alot.

 

[Martin C]

We'll expect you back in a week's time.

Getting a little pissed that people are too keen to dive in without reading anything then bump their thread because they haven't had a reply in 30 mins.

At least you now have a few days to have a good read.

 

[Oggy]

that is so Oggy

that was me and Rubbadubbgivemeabackscrub007 d**king about before. Although I do own a lizard, I don't recall the last time I ever used it. I think I fell asleep before the dump completed.

 

[nofeloniesyet]

that was me and Rubbadubbgivemeabackscrub007 d**king about before. Although I do own a lizard, I don't recall the last time I ever used it. I think I fell asleep before the dump completed.

lol,that thing should of had the speaker add on play cricket noises,make for a much better nap imo.

 

[ibrahim11]

its working now